Review of washing machines Belosnezhka

Advantages of equipment

Advantages of a semi-automatic machine:

Efficiency in water and electricity consumption;

• "Belosnezhka" can be used even in the absence of water supply;
• the machine operation process can be manually extended until the desired result is achieved;
• a wider
• choice of washing powders is allowed the price of semi-automatic machines is lower than that of automatic models; ;
• the washing and spinning mode can occur simultaneously.
• Characteristics

Depending on the specific model of the Snow White machine, the following technical characteristics are distinguished.

The Snow White XPB 3000S washing machine has a maximum laundry load of 3 kg, mechanical control, free-standing type. The body material is plastic. Drying and leakage protection are absent.

• The XPB 4000S model has a slightly higher load capacity - the machine is designed for 4 kg of clothing. The control is also mechanical.
• The Snow White XPB 6000 S type differs from the previous ones by an increase in load capacity - it allows 6 kg of laundry.Review of washing machines Snow White - washer.tomathouse.com
• Repair
• Wash

Exploitation

• Dishwashers
• Purchase
• Accessories
• Miscellaneous
• Reviews
• Home page
• Purchase
• Review of washing machines Snow White

CONTENT Advantages of technologyCharacteristics

Opinions

“Belosnezhka” is a domestic brand that produces semi-automatic washing devices and centrifuges. The manufactured models correspond to a low price category, so they are accessible to everyone. The semi-automatic washing machine Snow White meets all product quality certificates, and its functionality is almost as good as that of automatic machines. The products are created mainly for conditions of lack of water supply.

Advantages of technology

1. Advantages of a semi-automatic machine:
2. economical consumption of water and electricity;
3. “Snow White” can be used even in the absence of water supply;
4. the machine operation process can be manually extended until the desired result is achieved;
5. wider allowed
6. selection of washing powders
7. the price of semi-automatic machines is lower than automatic models;
8. The washing and spinning mode can occur simultaneously.
9. Characteristics
10. Depending on the specific model of the Snow White washing mashine, the following technical characteristics are distinguished.

The XPB 4000S model has a slightly higher load capacity - the machine is designed for 4 kg of clothes. The controls are also mechanical.

• The “Snow White” type XPB 6000 S differs from the previous ones by increasing the load capacity - it allows 6 kg of laundry.The energy consumption classes of the semi-automatic machines under consideration are A. The length of the drain hose on the 4000S reaches 90 cm. It has a water drain mode and a wash timer of up to 15 minutes. The engine power of “Snow White” is from 380 W. The models in question do not have a spin mode.
• Machine XPB 45-968S with spin. At the same time, the average capacity of clothes during spinning is 2.8 kg, and the power used in this mode is 140 W.
• The products in question are guaranteed for one year. In general, most Snow White models include:

two washing modes – soft and standard;

spin timer for up to five minutes; water level marks;

mechanism for mixing clothes while the machine is operating;

the water hose is connected to the water supply, or water is poured manually;

• a mechanism for fixing laundry during the washing process;
• simple control panel;
• semi-automatic filters that need to be cleaned regularly.
• The manufacturer of semi-automatic machines “Snow White” guarantees a high level of wear resistance and maintainability of its products.
• For washing in the countryside
• Mobile washing devices without a centrifuge are produced - they can be used even in the courtyard of the house.
• Each CM “Snow White” product includes a set of instruction manuals.
• Exploitation
• The instructions for using any Snow White model provide a clear and clear description of the entire work process: from putting laundry in the machine, to pouring and draining water. Water can go either down the drain or into a bucket or other container.

Sequence of washing steps:

• Soak the clothing either in clean water or in a liquid with powder for a better chemical effect on contaminated areas of the fabric.
• Place the laundry inside the machine, in accordance with the level of permissible load volume - from 3 to 8 kg. We must not forget that the volume indicated is for dry clothes, and wet fabric weighs more.
• The temperature during the washing process should not be higher than 50 degrees Celsius.
• Hot water is poured into the tank to the required level. Liquid can be added while the machine is operating.
• It is best to categorize clothes according to fabric characteristics, color and level of soiling before storing them.
• Press button “2” to select the operating mode.
• The machine operation timer is set for the required period of time.

The machine starts washing. It is important to ensure that the drain hose is secured to the machine body above the water level. For this purpose, the kit includes a special mount. At the end of washing, the clothes are spun manually or by machine if it has a spin function. The laundry is rinsed.Dirty water can be drained and clean water filled into the tank. Turn on the laundry spin mode for 4-5 minutes and take out clean clothes to dry.

With proper, careful use, semi-automatic “Snow White” machines operate without breakdowns for at least five years.