The Siberia washing machine is a high-quality semi-automatic household appliance, which is very popular due to its technical parameters and high efficiency during use.
Features and Benefits
The presented washing machine is produced by the POLET plant, which is a leader in the creation of semi-automatic machines in Russia. This technique was first released in 1957. Over more than 60 years, about 8 million of these machines were produced. The service life of Siberia is more than 20 years, thanks to the high quality of components and assembly. This washing machine has great priority over similar models from other manufacturers:
- high spin degree;
- small dimensions;
- minimum weight;
- vertical loading;
- reliable and easy to use;
- simultaneous operation of two modes (washing, spinning);
- low power consumption;
- low water consumption;
- high quality washing;
- loyal price category.
The Siberia-6 washing machine is used for washing, rinsing and spinning various items and linen. This model has two electric motors:
- for drive activator;
- for rotor drive centrifuges.
Main characteristics:
- 2 operating modes: normal and delicate.
- water volume for 1 wash: 37 liters of water.
- laundry volume for 1 load: 2 kg of laundry for normal mode, 1.5 kg for delicates;
- washing time: 5 minutes;
- spin time: 3 minutes;
- centrifuge rotation speed: 2,700 rpm.
Washing machine equipment:
- washing machine;
- user manual;
- 2 hoses: drain, fill;
- container for draining;
- tongs for things.
Recommendations for using Siberia
If the purchase of Siberia 6 was made in winter, then before the first wash, the equipment must stand in the room for at least 4 hours. Do not turn on the machine if there is no water in the water tank. Also, while the machine is operating, you cannot switch the equipment from one mode to another. The water supply must be at the required temperature. It is strictly forbidden to heat the water in the tank using a boiler. By following these simple rules, you will significantly extend the life of your washing machine and avoid premature repairs.
The control panel of the washing machine consists of the following elements:
- mode switch;
- centrifuge switch handles;
- activator switch handles.
Before starting the washing process, it is necessary to sort the laundry, dividing it into colored, white, dark, and also according to the degree of soiling. Thanks to this, you will be able to avoid re-dying fabrics and will be able to achieve the desired cleanliness of things.
The washing process is carried out in several simple steps:
- using the switch, you must select the appropriate washing mode;
- then you need to fill the tank with water at a temperature appropriate for the type of fabric;
- pour washing powder or pour liquid detergent;
- load laundry;
- set the washing time (washing one batch takes from 2 to 5 minutes);
- if the machine does not start after turning on, then you have exceeded the permissible weight of the laundry, therefore, you need to remove 1-2 items from the washing tank;
- after the washing process is completed, it is necessary to remove the dirty water and fill the tank with clean water for further rinsing, which is recommended to be done twice for 2 minutes;
- At the final stage, things are spun out. Due to the high speed of the centrifuge, things must be evenly distributed inside it.
General information
The Siberia A washing machine is activator. The activator itself is equipped with several blades, which rotate to foam the washing powder or other laundry detergent. In normal operation, the activator rotates clockwise, allowing you to wash items made from coarse fabrics such as cotton or linen. When operating in the delicate mode, the activator rotates in the opposite direction at a lower speed suitable for silk, wool and other delicate fabrics.
Engine power centrifuge is 120 W, and its speed corresponds to 2700 revolutions.The laundry is spun only with the top lid closed. If it is opened, the microswitch on the engine is triggered and the machine stops working.
Quiet operation with low vibration levels is provided by shock absorbers made of rubber, on which the motors are installed. Also, all joints of the units have rubber gaskets that reduce noise and also extend the service life of parts and elements.
- Care after work
- At the end of the washing process, the machine must be disconnected from the network;
- Thoroughly rinse the inside from soapy water residues;
Leave the lids open for 2-3 hours until completely dry.
Conclusion The Siberia washing machine is a practical, functional household appliance that is ideal for use in small apartments, the private sector, as well as in the conditions of a country holiday. In addition to the affordable price, high quality components and assembly, the machine is easy to operate.
