The MPU 700 dishwasher is installed in catering establishments with a maximum number of dining places of up to fifty people; for ease of use, plates and cutlery are placed in special cassettes.
Purpose of the equipment
Every organization whose activities involve dirty dishes has a reliable device for washing them, which has a good level of performance. The MPU 700 dome machine washes dishes perfectly, and the dimensions of any item should not exceed 53 by 32.5 cm.
Technical characteristics of the machine, its equipment
- one cassette can hold eighteen plates, six trays, six dozen cutlery or thirty-six glasses;
- water with the detergent composition is heated to forty degrees, rinsing is performed at a temperature of 85 degrees;
- the side tables of the dishwasher give it the following parameters - 190 by 90 by 150 cm. The total weight of the unit with a full set of equipment reaches 125 kg;
- The design operational period of the MPU 700 is up to eight years.
The equipment of the machine varies, but most often it consists of:
- one section for washing;
- two tables for cassettes - for loading and unloading;
- two shelves, mesh, five cassettes;
- six supporting elements;
- corrugated siphon, shower, movable tube;
- compartment with a container for detergent;
- a set of nuts and washers;
- nozzles and fuse link;
- spare membranes, cuffs, gaskets and rings.
Operating principle of MPU 700
The instructions for the dishwasher say that it has three working cycles:
- washing process – up to 65 seconds;
- pause – lasting about 5 seconds;
- rinsing – 10 sec.
The dishes are washed using a special pump that takes the detergent from the bath and transfers it to the spray unit. The dishes are rinsed using supplied hot water coming from the water heating tank.
A pause is necessary to switch the flow of water with the detergent composition and supply hot, clean liquid. The system responsible for the control is capable of extending the pause if the water heating element fails to cope with the task of heating the water. As a rule, this happens during intensive use of the MPU machine. A temperature sensor monitors the heat, preventing the flow of cold rinse liquid.
Installation procedure
The MPU 700 dishwasher is connected only by experienced specialists.First of all, the packaging material is removed and the completeness of the unit is checked. A loading table is installed, and a flexible line is passed through a special bushing and connected to the spray element. The dishwasher is installed vertically, levelness is checked with a level. The permitted difference should not exceed two degrees.
After this, tables for loading and unloading cassettes are installed and attached to the washing section. The height of the tables can be adjusted using special support elements. Particular attention is paid to the inclined level of the table, on which clean dishes are removed from the cassettes, while the water flows at an inclined angle into the bath. There are special shelves for storing cassettes.
The final stage involves removing the protective film from the component elements, connecting the MPU 700 dishwasher to the water supply, sewer and electrical network. To do this, use the recommendations given in the device’s operating manual.
- MPU 700-01M. There is no welded bathtub, heat exchange compartment or rinse aid dispenser. An additional table can be supplied for loading cassettes;
- MPU 700M 40,000 (42,000). The washing part is seamless, there is a showering device;
- model MPU 700M 41 000 has an additional table for unloading cassettes.
There is an inspection window on the front wall of the casing; the washing compartment is illuminated for easy visual control of the work process.
Conclusion
The industrial device for washing plates MPU 700 is distinguished by its simple and reliable design, and can perfectly cope with its task for a long period. The cost of the device is affordable, the model is easy to assemble and connect to all systems. The dishwasher MPU 700 is a good solution for small and medium-sized businesses.
