Error E1 in the Krona dishwasher - washer.tomathouse.com

Kron dishwashers are reliable, practical and economical, so it is not surprising that many consumers give them their preference. When any part or operating system of Krona dishwashers isfails, an error code appears on the display indicating a specific malfunction or a series of breakdowns. For example, an E1 error may appear at any time in a Krona dishwasher, which can be corrected by restarting the device or carrying out a quality repair.

Reasons for error E1

If An error code is displayed on the display of the Krona brand dishwasher E1, then this should alert the consumer to the possible presence of the following problems:

water was not collected into the tank during the period allotted for this by the device program;
the Krona dishwasher inlet hose or filter or valve is clogged;
there are certain malfunctions in the functioning of the dishwasher inlet valve;
such an option of the Krona dishwasher as protecting the machine from leaks has worked, which can also be displayed as an error coded as E15;
The electrical circuit responsible for the option of pouring water into the dishwasher has broken.

If the dishwasher Crohn's is active shows an error on the display E1, then the first thing the consumer should do is deprive the device of its power source, that is, disconnect it from the electrical network.In inactive mode, the device should remain inactive for up to 20 minutes, after which it can be restarted. This action will help to understand whether there is really a breakdown or whether the user is experiencing a normal system malfunction.

If after a break in work and after a restart the problem is not solved, then there is still a breakdown, it must be identified and eliminated.

How to solve error E1

How to fix dishwasher error E1 can be fully understood after the exact breakdown has been diagnosed and the technician has assessed the extent of the problem. So, if the user assumes that water has not filled into the machine due to a blockage, then it is necessary to act in this situation according to the following principle:

the water supply to the dishwasher is completely shut off;
the hose from the dishwasher body is unscrewed;
the internal contents of the hose are checked;
if dirt accumulates in the hose, the system is washed under intense water pressure;
the filter mesh is additionally inspected; if necessary, this part is also cleaned under running water;
Additionally, the intake valve channel is completely inspected.

If the user notices that the contaminants are quite strong and it is impossible to remove them under running water, it is worth soaking the clogged part in a solution prepared on the basis of citric acid, which will remove all contaminants. If there is no such problem as a clogged inlet hose, it is worth checking the actual operation of the water injection system, which requires professional skills.

The wiring will also require additional testing for quality of operation, as well as integrity, which must be performed after disconnecting the device from the electrical network.The cable may need to be replaced dishwasherwhich will be performed by a professional master. To perform a quality check of the intake valve, namely its serviceability, the user needs to perform the following steps:

Apply operating voltage to the dishwasher valve coil;
see if the valve membrane opens and how it happens;
Depending on the result obtained, perform further actions.

To properly check the electronic part of the device, you should use a device specially designed for this purpose - a multimeter.

If the part is broken, it is replaced with a new one. Perhaps the Aquastop system worked in the dishwasher if there was a possibility of a leak, which should also be checked. Knowing what to do with the E1 error code, you don’t always have to contact the specialists, which saves time and money, especially if we are talking exclusively about system failures.

If available real breakdown It’s still worth calling a specialist to your home, especially if the user is incompetent in the functioning of electronics.

Error E1 can indicate several problems at once, which should be resolved professionally and competently. To prevent such messages from popping up on the display, you need to carefully care for the equipment and handle it correctly, then breakdowns will become extremely rare.

You can fix a minor problem yourself, but the need to replace a part will require the intervention of a specialist who deals with Crohn dishwashers and knows how to repair them correctly.