If you have never encountered the problem of turning on a washing machine. then this article is for you. First of all, you need to read the instructions or look them up on the Internet. If you purchased the unit secondhand, ask the former owner if there were any difficulties with starting, perhaps there are some nuances.
Installing a new washing machine
Unpack the electrical device and unscrew the shipping bolts. They are located on the back surface of the machine. Plastic plugs must be inserted into the resulting holes.
Now you can install the machine on a hard surface (no need to put anything under the device). Next, you need to adjust the legs so that the machine stands stable; to do this, you need to gradually unscrew them to fix the desired height.
Preparing for launch
All modern models of washing machines differ little from each other in the startup procedure. Before turning on the washing machine, check that there is a power cord and that the appliance is grounded. If everything is normal, you can load laundry into the drum.
Each washing machine has its own capacity rating. Be careful, overloading may cause the crosspiece to fail.Most modern models have a function that notifies you if you have put more clothes than necessary.
After loading things, close the door. If you have a vertical drum, first close the door, and then the hatch. In a horizontal drum, close only the door.
The powder packaging indicates the amount that needs to be poured into the compartment. It is important to adhere to the dosage: if there is an excess, foam will appear; if there is too little, the clothes may not be washed. To avoid mistakes, use a measuring cup.
The powder tray has three sections:
- left – main department;
- medium – intended for air conditioning;
- right – preliminary.
Basically, the compartments are located like this: on the left - for the main wash, next to them - for rinsing and pre-washing.
Now you need to fill the washing mashine with water. Most washing appliances are connected directly to the water supply, but some models have separate tanks. After completing this action, we connect the device to the network.
Next, select the washing mode on the control panel. We take into account the type of washing and type of fabric.
Washing types:
- careful;
- children's clothing;
- fast;
- washing everyday clothes.
There are separate modes for the following types of fabrics:
- wool;
- cotton;
- synthetics.
Types of modes:
- Special regime. This feature is only available on new models. This type of washing disinfects and protects white items with steam and removes stains. The mode is described in more detail in the instructions for the specific machine model.
- Delicate wash. Slow rotation and low flushing speed. In this mode, the fabric is not subjected to intense exposure. Suitable for delicate items.
- Light spin. First a quick wash, then a slow wash.
- Ordinary. Fast rinsing and equally fast spinning.
Temperature detection
Temperature ranges from 30 to 95 degrees. Here are some recommendations for choosing a mode:
- The temperature is selected depending on how dirty the clothes are. If you just need to refresh, then choose 30-40 degrees.
- Synthetics wash perfectly in conditions of 40-60 degrees.
- Bed and bath linen and accessories require the highest temperature.
Spin intensity
The intensity is determined by the number of revolutions per minute. Naturally, the more efficient the spin is, the less water there is in things - you take almost dry clothes out of the washing machine.
Don't forget: fabrics that require more delicate treatment should be washed at a lower intensity. It is generally better to wash silk and chiffon without the spin function.
Washing program
Installing the program is the most important stage of the process. You can't do without instructions here. Be sure to take into account temperature conditions - some fabrics may become unusable from hot water. Control panels look different. Expensive models are equipped with touch sensors, simpler washing mashines have a regular wheel.
Now let’s start, to do this we find the “Start” button and press it.
When the washing process comes to an end, the machine will give a signal or the button will flash that the washing is finished. We disconnect the device from the power supply, open the door and take out things.
How to start a washing machine
It is better to do the first wash as a test wash to check your washing machine for leaks. Additionally, you will ensure that everything is connected correctly. If you suddenly find a leak, stop the equipment immediately.
Tips that will be useful after purchasing a washing machine:
- If, after starting, the machine makes strange sounds or shows other signs of malfunction, do not do anything yourself. Call the service and they will repair you under warranty or replace the defective item.
- The housing requires regular wiping; use products that do not contain chlorine.
- The rubber seal gets dirty quickly and needs to be cleaned too.
- Manual powders are absolutely not suitable for an automatic machine; this may not only fail to wash the laundry, but also lead to breakdown.
- Do not overload the drum - follow the limits specified in the instructions.
- Before putting it in the machine, check the clothes for foreign objects.
- After finishing washing, do not rush to close the door, let the drum dry. If this is not done, an unpleasant odor or mold may appear.
- Descale frequently.
Remaining powder in the compartment can cause damage to the washing machine, so you should:
- Use a water softener.
- Be sure to rinse the container after each wash.
- Clean trays.
- The powder must be of high quality.
- If you resort to concentrates, do not forget to rinse the machine.
What funds may be required:
- universal powder for various types of laundry;
- powder containing bleach;
- products for colored fabrics;
- products with biological additives to remove the most difficult stains;
- special powders for washing in cold water on a delicate cycle;
- synthetic products;
- reagents that allow you to wash white things.
How to turn on the Indesit washing machine
Before turning on the Indesit model, you need to make sure that the hatch is securely closed. Then, after making sure you have detergent, press the power button.Select a program, taking into account the characteristics of your laundry, and activate the washing process with the “Start” button.
How to prepare clothes for washing
There is a label on the clothes with washing instructions. Always look at this data so as not to spoil things. Some fabrics cannot be washed in hot water, or cannot be washed with bleach, or in general can only be washed by hand.
Stack items by color to avoid staining. Sort into dark, light and denim colors. Sort clothes into heavy and light ones. Heavy fabric includes jackets, various bath accessories, sweaters, and cotton items.
Some stains require special preparation, such as grease stains. At high temperatures, some stains are difficult to remove, so using this mode is not advisable.
