Hotpoint Ariston dishwasher - error 5

If the error reappears, we proceed to checking the tank. To do this, unscrew the plug from it, pump out (using a rubber bulb) the water and the remaining saline solution.After this, fill the container with clean water to rinse it from any remaining salt grains. We pump out again, fill in a small amount of water and add salt intended for the dishwasher.
CONTENTS

If the results of the work again turn out to be disappointing, the search for the problem will have to continue.Washing dirty dishes is considered an unpleasant task, and it is better to entrust this matter to dishwashers from Ariston. The machine is popular, successfully combining cost and quality. But, like any other mechanism, the dishwasher may have malfunctions, which can be found out with the help of the self-diagnosis system. Today we will consider what error code 5 means in the Ariston dishwasher, and how to get rid of the problem. Causes of error code 5 As soon as the display gives this signal, and the dishwasher stops the operating cycle, experts advise to observe the behavior of the equipment. It is imperative to make sure that the liquid is drained. It is necessary to inspect the control panel for a signal from one of the indicators. In the classic version of this error, in addition to the code displayed on the screen, the "on / off" lamp blinks.

What could have happened if the dishwasher behaved in this way?

The first problem

may be blockages in the trash filter, drain hose or salt container.

The second reason may be a failed pressure switch.

Rarely, but such a problem also occurs the communication system from the main units of the Ariston dishwasher

to the module responsible for control is broken.Hotpoint Ariston dishwasher - error 5 - washer.tomathouse.com – Repair WashExploitation

Dishwashers

Purchase

How else can I fix the error?

Accessories MiscellaneousReviews

Home page

  • Dishwashers
  • Hotpoint Ariston dishwasher - error 5
  • CONTENT
  • Reasons for error code 5
  • What to do first?
  • How else can I fix the error?
  • Conclusion
  • Washing dirty dishes is considered an unpleasant task, and it is better to entrust this task to dishwashers from Ariston. The machine is popular, successfully combining cost and quality. But, like any other mechanism, malfunctions are possible in the dishwasher, and the self-diagnosis system helps you find out about them. Today we’ll look at what error 5 in

Ariston dishwasher

, and how to get rid of the problem.

Reasons for error code 5

Now you have to check the pressure switch. As a rule, it turns out to be in good working order, but particles of dirt or drops of machine oil may get into the tube, which becomes the reason for refusal to work.

As soon as the display gives this signal and the dishwasher stops the working cycle, experts advise observing the behavior of the equipment. It is imperative to make sure that the liquid is draining. It is necessary to inspect the control panel to see if any of the indicators are giving a signal. In the classic version of this error, in addition to the code displayed on the screen, the “on/off” lamp blinks.

What could happen if the dishwasher behaved this way?

The first problem

There may be blockages in the garbage filter, drain hose or salt container.

Second reason

The pressure switch may be faulty. Rarely, but such a problem occursthe communication system from the main nodes is disrupted

Ariston dishwasher
It is necessary to check the device and tube for blockages. Electrical wiring should not be neglected because it can also create problems. If necessary, it is recommended to replace the pressure switch with a new analogue.
What else can you check if everything is in order and no blockages are found? We think logically, because we have already excluded the simplest versions. Some users try to check the water intake valve, believing that this is the cause of the error. We advise you to simply inspect the board responsible for the control. Pay close attention to her contact group. If traces of oxidation are found, the contacts must be cleaned. For more serious defects, you will have to seek help from a repair center.
You should not try to repair the control modular unit yourself.It is likely that you will completely ruin an expensive unit, the price of which for an Ariston dishwasher reaches almost two hundred US dollars. In this situation, it is more advisable to wait for the master to avoid incurring unnecessary financial expenses.
Conclusion
the Ariston machine

As you can see, error code 5 on for blockages. The fact is that users often, violating the requirements of the operating instructions, use table salt when operating the dishwasher. There is nothing good in such a solution, since the container immediately becomes clogged, and the water in the closed system is not able to circulate normally.
open the loading hatch of the machine;

Ariston dishwasher remove and move aside the basket for dirty dishes located below;
remove the filter together with the coarse cleaning mesh, wash everything thoroughly using detergents;

is not yet an alarming signal that the equipment is irretrievably lost. Using the recommendations given, you can completely solve the problem yourself. inspect the place where the filter is installed for debris, install the element in its place;
having installed everything in its place, check how the machine now works.

similar posts from this section If the error reappears, proceed to check the tank. To do this, unscrew the plug from it, pump out (using a rubber bulb) water and the remaining saline solution. After that, fill the container with clean water to rinse it from the remaining salt grains. Pump out again, pour in a small amount of water and add salt intended for the dishwasher.Having identified approximate faults, you should check the machine. Ariston. There is a possibility that the problem can be resolved with your efforts, without the involvement of experienced professionals.
The simplest thing you can do is check