The Malyutka washing machine has many advantages. Such a machine is lightweight, does not require communications other than electricity, is small in size and low in cost. It is suitable for those people who do not have serious requirements for washing equipment. In this article you will learn how to wash in Malyutka.
Preparing the machine
The “Malyutka” washing machine is activator, since the rotation of things in it is carried out using an activator. Most washing machines of the “Malyutka” type are equipped only with an activator, a tank, and a mechanical timer.
The latter is necessary to start the washing process. And only some machines of this type have an installed centrifuge. And two-tank “Malyutka” washing mashines are even rarer. In such washing machines, washing is done in one tank, and in the other. spin.
In any case, the first thing to do is prepare the washing machine for washing. It is necessary to choose the right place for the equipment and install it so that it is convenient to work with it.
In other words, there should be no inconvenience when filling and draining water, as well as when loading and unloading laundry.
As a rule, the washing machine is installed directly on the bathtub on a wooden grate. Upon completion of the wash, you just need to open the plug located at the bottom of the washer and all the water will pour into the bath. You can also place washing equipment on the floor.But to do this, you must first connect a drain hose to the water drain hole, and then close it so that the water does not spill out.
Next, you should pour water into the “Malyutka” machine. Most owners get hot water for washing from the tap.
Water can be collected as follows:
- collect hot water in a bucket and then pour it into the washing machine;
- put the shower hose into the Malyutka washing machine;
- Place the hose on the faucet and draw hot water into the washing machine.
The fact is that hot water often contains a large amount of impurities. It also often has a red tint. This water should not be used for washing white items or items made from delicate materials.
Next pour into washing mashine "Baby" required amount of washing powder. It is important to note that any powder can be used for washing. Even powder intended for hand washing will do. It is important here that it dissolves well in water. Then prepare the dirty things.
It is important to follow the following rules:
- Do not wash colored laundry together with white and black;
- Avoid overloading washing equipment. To do this, it is recommended to wash in small parts;
- If clothing contains buttons and zippers, it must be buttoned and then turned inside out;
- There should be no items in clothing pockets.
Turning on washing equipment
Washing machine “Malyutka” and things are already prepared. Next, turn on the washing machine. To do this, close the lid of the washing machine, and then plug the wire into the socket.After this, turn the timer located on the body for one to six minutes. The time should be selected depending on the degree of soiling of the laundry being washed.
If it’s too dirty, you can soak it in the tank beforehand. "Baby" washing mashines for 20-30 minutes. Then start the washing process. Very soiled laundry can be spun twice.
The same water can be used for several wash cycles. For example, wash white clothes first, and then black or colored ones. The water should be changed after completing two or three wash cycles. Next is rinsing. It is performed in the same way as washing. And spinning is usually done manually.
In washing machines with a centrifuge, you must first drain the water. Then install a centrifuge in the tank and put the washed clothes in it. Next, you need to turn the spin toggle switch.
If the Malyutka machine contains two tanks, then the laundry must be transferred from one tank to the second, and then start spinning.
What to do after finishing washing?
When the washing is finished, you need to take care of the washing machine. First of all, you need to drain the water from the tank, and then disconnect the washing machine from the electrical network.
Next, wipe the washer tank dry with a rag. After this procedure, leave the “Malyutka” machine open for some time. Then it will dry well and mold and rust will not appear in it.
