Over time, any equipment is subject to some malfunctions or breakdowns, some of which do not greatly affect the performance of the device, while others lead to the inability to use the equipment. If there is powder left in the washing machine tray, washing is still possible, but its quality will leave much to be desired. You should not use a washing machine with such a malfunction for a long time, as this can lead to other, more serious damage.
The principle of collecting powder into the machine
Powder intake directly depends on the type of valve installed in a particular washing machine model. Old ones that are no longer in everyday use use complex mechanisms by which water gradually picks up the powder during operation.
With new washing machines, everything is much simpler; water is supplied to all compartments using solenoid valves and electronic control. In this case, the failure will mainly be in the valves.
The main reasons why washing powder remains in the machine:
- Using low-quality or completely unsuitable powder. This especially applies to those who like to buy the cheapest washing products, which are simply not designed for use in washing machines.As a result, some of the washing powder remains, and in addition, there is a risk of complete failure of the equipment. Using a higher quality powder will help get rid of this problem.
- Hard water, which is a real problem in a number of regions of our country. It can be the reason why powder remains in the machine. To avoid possible problems in the operation of the washing machine, it is recommended to use special water softeners.
- In some cases, the machine retains powder due to the fact that the water supply valve is not fully open. In a number of cheap washing machines, the water supply valve must be opened manually, some users, due to inexperience, do not do this completely, which is why detergent remains in the tray. Therefore, it is worth opening the valve all the way (usually until a characteristic click).
- Another reason why washing powder remains in the machine is low water pressure, which can occur when the pressure is insufficient. In this case, cleaning or completely replacing the pipes that supply cold and hot water will help. If the problem is really in clogged pipes, cleaning or replacing them will fix the situation. Attention! Before repair work, it is necessary to disconnect the pipes from the water supply and remove them. If the pipes are very old, it is strictly not recommended to clean them, often this leads to further breakthrough and flooding. It is better to buy and install new pipes for the water supply.
- In some cases, the user simply makes a mistake with the compartment for placing the detergent. If the powder is poured into the wrong compartment of the washing machine, of course, it will not be washed away.It is recommended to remove all detergent if it is in the wrong compartment, as this can directly affect the performance of the washing machine.
- A clogged fill valve also often causes poor quality washing. In case of any breakdowns, the valve may close prematurely, due to which the water and powder will not be completely used, and some of the detergent will remain in the container. To prevent powder from remaining in the washer, you should completely clean the filter, but this must be done with extreme caution, otherwise you risk breaking the part. In case of this breakdown, it is not always possible to clean the valve; there is a chance of damaging or breaking it. In some cases, it will be necessary to completely replace the filling valve of the washing equipment; often after normal cleaning it begins to leak, which can lead to flooding in the bathroom.
- Drain pipe is clogged. Usually, clogging occurs in cases of incomplete use of powders or other detergents, as a result of which they clog the drain pipe, which leads to problems in the operation of the equipment or even complete inoperability. You can also clean the drain pipe yourself, but you should do this as carefully as possible. If the pipe is damaged, you will have to throw it away and buy new ones. You should not use damaged parts; this can lead to flooding of the bathroom and your neighbors living below.
- Using too much powder will also negatively affect the performance of your washing machine. If there is too much detergent, the equipment will not have time to use it until the very end.As a result, some of the washing powder will remain in the detergent compartment and other elements, interfering with correct operation. To prevent powder from remaining in the washing machine, it is recommended to use special measuring cups (usually they come with various washing equipment, including washing machines). If the measuring cups were not included (the manufacturer turned out to be greedy or the seller forgot to include them), it is recommended to buy it.
Conclusion
Most cases of powder remaining in the washing machine are not something complicated or too scary. The user can solve most of the problems himself by changing the washing powder or using a special measuring cup. More experienced users with basic technical knowledge may try to clean or replace the filters or water supply and outlet hoses.
In some situations, it is recommended to contact a specialist, especially if the breakdown lies in the internal mechanisms of the washing machine. It is unlikely that ordinary users will be able to repair a serious breakdown on their own, while a good specialist will quickly find and fix the problem that appears in a short period of time.
