So, you purchased a Candy 1052D1/2-07 washing machine. All that remains is to congratulate you on your successful choice. In this user manual, we will provide basic operating instructions. Therefore, we highly recommend that you familiarize yourself with them before use. After familiarization, you can install and use the device safely. Even after reading and installing the machine, do not throw away the user manual.
Rules for the safe use of Candy 1052D1/2-07
The instructions for the washing machine indicate that it is intended for household purposes. Used in apartments, private houses, offices, hotels, hotels, shops. The use of the device for purposes other than household purposes is prohibited. The manufacturer does not bear any responsibility for breakdown or damage to the Candy 1052D1/2-07 machine if it is used outside the home. In this case, the manufacturer's warranty is canceled. The warranty also does not apply if the Candy 1052D1/2-07 washing machine is installed at home, but is not used for domestic purposes.
Do not allow children to play with the washing machine.The instructions indicate that children over 8 years of age can use the device only after receiving the necessary instructions. Persons with disabilities are only allowed to use the device in the presence of others or after receiving instructions for use.
- Children under 3 years of age should not remain near the device without adult supervision.
- If the power cord is damaged, you should not replace it yourself. Contact the manufacturer or specialists.
- According to the instructions, the water pressure range should be 0.05-0.8 MPa.
- Ventilation must not be blocked, so do not install the Candy 1052D1/2-07 on carpeted floors.
- The machine is turned off only when the handle on the control panel is turned to the vertical direction. In other positions, the Candy 1052D1/2-07 washing machine is on.
- When installing washing equipment Candy 1052D1/2-07, keep in mind that you need to provide the necessary access to the electrical outlet.
- If you want to clean the device, do not forget to turn off the water and unplug the device.
- According to the instructions, the Candy 1052D1/2-07 washing machine must be grounded. If there is no grounding, you will need to call an electrician.
- The use of extension cords and tees is prohibited.
- When opening the hatch door, there should be no water in the drum of the Candy 1052D1/2-07 machine.
- When unplugging the washing machine, pull out the cord only by holding the plug.
- The Candy 1052D1/2-07 machine must be installed in places that are protected from rain and direct sunlight.
When carrying the device, it is important to follow several rules specified in the instructions:
- One cannot lift the Candy 1052D1/2-07 machine - it is very heavy. A minimum of two people are recommended for carrying.
- When lifting the unit, do not hold the control panel handles or the cleaning agent cassette.
- During transportation, the hatch door should not rest against anything.
If the Candy 1052D1/2-07 washing machine breaks down, do not try to repair it yourself. Disconnect the washing machine from the water supply and unplug the power cord. Then call a service specialist. When replacing any part, use new parts from branded stores.
Installation
Washing machine Candy 1052D1/2-07 was purchased and brought home. You have chosen a suitable location that meets the conditions described above. Now we begin to install the unit. It is recommended to do this in accordance with the instructions.
After unpacking the Candy machine, do not throw away the packaging and store it out of reach of children. The ropes are carefully cut from the hoses. On the rear panel, you need to unscrew the screws and remove the gaskets. In the package with instructions for the Candy 1052D1/2-07 machine you will find plugs with which you can plug the resulting holes. The next step is to install a polystyrene coating on the bottom of the machine.
Connecting the Candy 1052D1/2-07 machine to the water supply
Before connecting, you should adjust the height of the electrical appliance. This is done by unscrewing the legs with a wrench. Turn the nut clockwise. Once loosened, raise or lower the legs of the Candy 1052D1/2-07 machine to the desired height. Then tighten the nut to secure the legs.
To connect the Candy 1052D1/2-07 machine, it is prohibited to use old hoses.Only new ones supplied with the device are used. The inlet hose is connected to the water tap.
According to the instructions, the end of the drain hose is placed in the bathtub or installed in the drain hole at a height of at least half a meter above the floor. The diameter of the drain hose of the Candy 1052D1/2-07 washing machine must be larger than the water supply hose. Make sure that the hose does not bend in the space between the wall of the house and the device.
Circuit
Now we connect the Candy machine to the network. Immediately check the integrity of the power cord. If it is damaged, contact customer service.
Detergent cassette
The Candy 1052D1/2-07 washing machine tray has three compartments. The right one is for detergents during pre-wash. Central compartment for special products that improve the quality of washing. Left compartment for detergents during normal washing. Also, in addition to these three sections, the cassette may contain a cup for liquid detergents. It is located in the left compartment.
Tips for proper washing
The instructions for the equipment indicate that before loading laundry into the drum of the Candy 1052D1/2-07 machine, it must be sorted by type of fabric, soiling, etc.
You can find a special label on the clothes that indicates the type of wash and the required temperature. Make sure that there is nothing left in your pockets, especially metal products that could harm the Candy 1052D1/2-07 machine. All buttons and zippers on clothing must be fastened. Do not place items with poorly sewn buttons in the drum. When washing woolen fabrics, find out if they can be washed in the Candy 1052D1/2-07 washing machine.
If you plan to wash carpets and other heavy fabrics in the Candy 1052D1/2-07 machine, then you can do without spinning.
It is recommended to load the drum 100%. Thanks to this, you can save energy and make better use of water and detergent.
The instructions for the equipment indicate that the pre-wash program of the Candy 1052D1/2-07 washing machine is necessary when washing very soiled laundry, the presence of large stains that are difficult to remove, or when cleaning work clothes. If the laundry is not heavily soiled, there is no need to use the pre-wash cycle. You can save detergent and energy.
Using hot water requires a large amount of resources. To save money, you can do without this mode. Clothes must be soaked in water in advance, and stains should be treated with a special product.
Now let's talk about the recommended temperature for different types of fabrics and stains:
- According to the instructions, it is recommended to wash white, heavily soiled fabric in the Candy 1052D1/2-07 machine at a temperature of 60 degrees and above, selecting the washing mode for cotton items. This uses powder.
- At temperatures between 40 and 60 degrees, choose a detergent according to the type of fabric. The powders are suitable for white and colored fabrics with stubborn stains. Liquid detergents are used for not very dirty things.
- Washing in the Candy 1052D1/2-07 machine at temperatures below 40 degrees requires the use of liquid products or products that indicate the recommended washing temperature (below 40).
- In accordance with the instructions, wool and silk items are washed with special detergents intended for this purpose.
Process management
The Candy 1052D1/2-07 washing machine automatically regulates the water level depending on the amount and type of laundry.
So, the laundry is sorted and loaded into the drum of the device.Now you need to turn on the machine, pour detergent into the cassette and select a washing program.
The washing program is activated on the control panel. You can also set the washing temperature. Now press the “Start” button and the washing of things has begun.
If suddenly the Candy 1052D1/2-07 machine turns off due to a power outage, then don’t worry. The machine has a special device that remembers where the wash was interrupted. When electricity appears again, the process will continue from the point where it was interrupted.
The wash is completed when End appears on the display. The hatch cannot be opened immediately - it will be blocked. After about two minutes, the Candy 1052D1/2-07 machine lock will turn off (the indicator light will go out) and you can remove the laundry. Turn off the machine from the network. Before doing this, turn the program selection knob to the OFF position. Let's look at the buttons on the device's control panel.
Start/Pause button. The instructions indicate that you need to press it with the hatch door closed. To pause the wash and remove or add laundry, you need to press this button and hold it for about 2 seconds. After this, you will have to wait 2 minutes until the door unlocks. When opening it, make sure that the water level is below the opening. Having completed the necessary steps, close the door of the Candy 1052D1/2-07 washing machine and press the button. The wash will continue from where we left it.
Delayed start button. Delays the start of the wash cycle. To activate this function, you need to select a program, press the button twice (after the first press, h00 will appear on the screen, after the second, h01). Each subsequent press of the button will increase the number by an hour. The maximum value is h24. The value is then reset to zero.After selecting the desired delay time, press the Start button. A time report will appear, after which the Candy 1052D1/2-07 machine will automatically start washing.
Functions button. Using this button you can select the additional options Hygiene+, extra rinse and light ironing.
“Quick/Port level” button. With its help, one of two functions is selected.
Fast. When the washing program is set to “Fast”, the button becomes activated. By pressing it, we can select the washing duration.
Pollution level of the Candy 1052D1/2-07 machine. When choosing a program, we see the washing duration. Using this button we can select the intensity we need depending on the degree of contamination of things.
“Temperature selection” button. As the name suggests, it changes the temperature.
“Spin Select” button. Cancels the wash cycle or reduces the speed.
Maintenance and cleaning of the Candy 1052D1/2-07 machine
Wipe the outside of the Candy 1052D1/2-07 washing machine with a damp cloth. The instructions indicate that it is prohibited to use solvent or similar products for this purpose. Cleaning a washing machine is not difficult or time-consuming. Includes cleaning of the cassette and filters.
The cassette is cleaned to prevent the accumulation of detergent residues on its walls. We take out the cassette and clean it under running water. After cleaning, return it back.
Cleaning the filter of the Candy 1052D1/2-07 machine is also important. It keeps large particles such as buttons out of the drain pipe. This way the pipe does not become clogged with debris. How to clean it?
You need to pull out the corrugated hose. Afterwards, the plug is removed and the water is drained into the container.Then the filter is pulled out. You should place a cloth under it so as not to flood the floor with water. To remove the filter from the Candy 1052D1/2-07 machine, you need to turn it counterclockwise. When you reach the limiter, it will come off. Now it can be cleaned. It is installed back according to the same principle - now clockwise. Next, all the parts are attached.
