Indesit wiun 102 - washing machine operating instructions in Russian

Indesit washing equipment is very popular all over the world. It is a worthy choice for undemanding users. It will appeal to people who value simplicity and are not willing to overpay for functions that they will not use. This article contains instructions for the Indesit WIUN 102 washing machine.

How to connect the machine yourself?

After transporting the washing machine, you must unpack it. Next, you need to unscrew the shipping fasteners, regardless of whether your washing equipment is new or used.

The device cannot be transported without these bolts, as moving parts may break. So, after removing the packaging, you need to unscrew the bolts on the back of the machine and plug the resulting holes using plastic plugs.

transport bolts

Then the equipment must be placed on the floor, which has been previously leveled and reinforced. The distance between the place where the device will stand and communications should be less than 150 centimeters. It is also necessary to provide a grounded socket for the machine.

The following sequence of actions must be performed:

Install the device near the place where it will be located in the future. Take the curved end of the inlet hose and screw it to the outlet of the washer.
In the place where the inlet hose connects to the tube, a rubber gasket must be laid. It will ensure the tightness of the connection. The fitting washer is screwed on by hand, without the help of tools. Don't tighten it too much.
Straighten the drain hose. The top drain point should be at a height of 65 to 100 centimeters. To secure it, you can use the latches located on the back of the machine.
Push the washing machine into the place prepared in advance for it. We should not forget about the gap between the interior items and the side walls of the machine. It should be at least one and a half centimeters. The gap at the back should be 5-7 centimeters to avoid damaging the hoses.
Extend hoses to the sewer and water supply. The inlet hose must be connected to a cold water pipe. The drain hose is connected to the outlet in the siphon. Use a clamp to secure the hose.
The power cord is located on the back of the device. Before you push the washer in, you need to pull it out. It is prohibited to use tees and extension cords to connect the unit to the electrical network. It is advisable to install a voltage stabilizer.

When connecting washing equipment to communications, it should be taken into account that the inlet and drain hoses cannot be extended by more than 150 centimeters. If extension is required, you must contact the service center. Do not use old hoses for these purposes. Violation of connection rules can have serious consequences. And the manufacturer in this case is not responsible, regardless of whether the machine is under warranty or not.

Powder receiver device

It is important to note that the first start-up of the device must be performed with an empty drum and at high temperatures. After connecting the washing machine, you need to examine its elements. You can start with the detergent drawer.

Indesit WIUN 102 powder receiver

The powder receptacle in this washing machine contains three sections:

The section on the left edge is used for products that are used in the pre-wash.
The next section is for the main wash;
The section on the right edge is used for air conditioners.

There is also a fourth additional section. It is installed in the left compartment. It is intended for bleaches. It is better to remove this section and install it when bleaching laundry.

Let's start the wash

The washing process is started using a mechanical control panel. There are two rotary knobs and five buttons on it.

To start the washing program, do the following:

Connect the device to the power supply;
Open the water supply tap;
Turn on the machine by pressing the button located on the right;
Next, you need to load the drum and close the hatch door;
Add detergent to the powder receptacle;
Select the washing program using the program selection knob. On the tray for washing powder there is a decoding of the program number. The instructions for the Indesit WIUN 102 machine describe in detail all eleven washing programs;
The temperature selection knob must be set to the required value;
Press the start button.

Washing programs Indesit WIUN 102

This Indesit model contains the following additional functions:

Easy ironing;
Reducing the spin speed of laundry;
Bleaching.

Washing equipment maintenance

When operating the machine, do not forget about caring for it. At the end of washing, it must be wiped with a dry cloth.

You can also first wipe the device with a cloth soaked in soapy water. But cleaning products should not be used. Then you need to wipe the control panel, rubber cuff, and drum.

Next you need to pull out the washing powder tray. This is easy to do. You need to lift it and gently pull it towards you. Next, you should wipe the area under the powder receptacle and rinse the tray itself.

After cleaning, the tray is installed in its original place. It should be left slightly open for ventilation. The hatch door should also not be closed completely. Every six months, remove the drain filter and wash it.

After each wash, the machine must be disconnected from the power supply. And don't forget to turn off the water. This will protect the device from voltage surges and pump failure.