Many people are interested in knowing the answer to the question - why does the machine jump and vibrate during washing, especially if there is no good reason for this? The first thing that comes to mind is the broken legs of household appliances, which is why they stand unevenly during operation. Unfortunately, many owners of washing machines do not pay any attention to this nuance, but over time this can only aggravate the problem and lead to serious damage.
Therefore, when identifying such a problem, it is better to carefully understand why the washing machine jumps so much during the spin cycle, and how can you eliminate this phenomenon yourself?
Main reasons
Before answering the question - what to do if the washing machine jumps during the spin cycle, you first need to understand the reasons for this phenomenon. Professionals say that there are quite a lot of them - some of the reasons can be quickly detected with the right approach, while others, on the contrary, require a long study and subsequent repair.
Usually the washing machine jumps for the following reasons:
- Transport bolts. They are installed on the unit in order to protect its mechanism when transporting the “washing machine”. After installing it, the bolts are unscrewed, as they reduce the efficiency of the device and can cause breakdown.The location of the bolts and their exact number must be specified in the operating instructions. They must be removed before use - if this does not happen, the device will jump a lot during spinning.
- Uneven and slippery floor. This is another reason why the "washing machine" can jump during operation. The equipment must be on a flat and non-slip floor. But even in this case, the device can vibrate and slide a couple of centimeters during washing. And if the floor surface is very uneven, the unit will simply roll down it, and will also vibrate and jump a lot. To reduce noise and prevent rattling, you can buy special mats or footrests. They are made on a rubber basis, which prevents the "washing machine" from moving on the floor during operation. You should also pay attention to the length of the legs - if it is different, the machine jumps a lot even on a flat surface.
- Reloading the device with laundry. Even a fully functional device will vibrate and jump during spinning if there are too many things in it. In this case, this phenomenon is observed due to the fact that all the laundry is collected in a lump, which is constantly rolling in different directions. This phenomenon is called imbalance - to avoid its occurrence, it is necessary to take into account the weight of wet laundry, which should not exceed the permissible load of the drum. It is recommended to wash bed linen and blankets separately from small items, as they quickly twist, thereby creating heavy lumps.
- Foreign objects in the device. Often the machine jumps during spinning, and also swings strongly due to objects stuck in it.They can be coins, buttons, pins, or trash that people forget to remove from their pockets before putting the item in the wash. Penetrating into the inner part of the mechanism, this causes a malfunction of the drum and other parts of the device, which leads to strong vibration.
- Worn shock absorbers or springs. Such parts, unfortunately, are not designed for the full service life of the device, since they are subject to a large load. Therefore, they often fail, especially if the springs or shock absorbers are of poor quality. Therefore, the owner of the washing machine needs to promptly change its components, regardless of the model of the device (Samsung, LG, and so on).
- Bearing failure. This is considered a common reason why the machine jumps during the spin cycle. In addition to vibration, the owner of the equipment may also notice a strong rumble inside the unit, which manifests itself only when the “washer” is turned on. As a result of increased humidity, some mechanisms quickly become covered with rust, which causes incomplete operation of the device. However, this phenomenon rarely manifests itself - only after 5-6 years of operation of the washing machine.
Having identified a deviation in the operation of the device, you should not put off repairing it, as this may soon lead to a complete stop of the washing machine.
Washing machines that vibrate most frequently during spin cycles
Manufacturers, when producing washing machines, each time try to improve them and reduce the noise level. However, during the spin cycle, the drum rotates too quickly, so it is simply impossible to completely avoid vibration.
The following washing machines jump the most:
- Narrow built-in washing machines.Due to its narrow body, the support of the device is significantly reduced, so if the unit is poorly secured, it will constantly jump. In addition, narrow washing mashines vibrate more often than wide ones. This is explained by the fact that their area is smaller, which means their stability is worse. Also, narrow appliances have narrowed drums, in which things often clump together.
- SMAs equipped with metal tanks also often jump during the spin cycle. Therefore, before purchasing, you must ask the seller what material the main part of the machine is made of. Metal tanks make a lot of noise during spinning, compared, for example, with plastic ones.
When purchasing, experts advise paying attention to the way the device is secured and the materials from which its parts are made - thanks to this, unpleasant vibration can be avoided.
How to troubleshoot your washing machine yourself
Most often, the owner of the equipment can get rid of problems on his own. First you need to decide where it is best to place the device and how to secure it. To avoid vibration during spinning, professionals advise adhering to the following algorithm of actions:
- First you need to turn off the selected washing mode and completely disconnect the device from electricity;
- then you need to open the door - if this does not work, you need to drain the water through the emergency device;
- the next step is to lay out half of the things from the drum;
- then you need to turn on the most suitable washing program.
Additional tips on how to get rid of vibration include:
- After installing the device, check whether it is wobbly;
- install the machine strictly level;
- Set the first wash for the minimum time;
- do not neglect the operating rules described in the instructions.
If the device jumps due to faulty parts, they must be replaced. Before this, it is prohibited to use the washing machine.
If any object is stuck in the unit, do not turn on the wash until it is removed.
How to avoid vibration
To prevent unpleasant noise from disturbing the owner while washing things, first of all, he should not ignore the purchase of special footrests or a shock-absorbing mat. They are especially good at getting rid of noise in case of uneven or slippery floors, and a good floor covering will protect against chips and scratches.
If the “washing machine” is built-in, when choosing a cabinet it is important to remember that it should be 2-3 cm larger than the diameter of the household appliance, since even the newest models will jump a little during the spin cycle. Otherwise, the cabinet will not last long.
Soundproofing can be applied to the wall behind the washing machine to protect the body of the washing machine and the wall covering.
It is important to time a lot of things correctly, as reloading the drum will cause the machine to vibrate a lot. Professionals advise leaving 1/3 free when loading the machine. This will be quite enough to avoid unpleasant jumps and loud noise during the spin cycle.
It is better to wash large and small items separately. This will help avoid curling of the laundry, which is then difficult to untangle when wet.
If the owner of the “washing machine” treats it with care, the device can last more than 10 years (however, some parts will still have to be replaced earlier).But if you do not pay attention to the noise and vibration of the device, this can lead not only to its breakdown, but also to flooding of neighbors. The washing mashine must be regularly inspected for breakdowns and washed with special products, which will significantly increase its service life and protect the owner from unpleasant noise.
