How to clean rust from a washing machine

Rust on washing machine or on internal parts appears in case of scratches and dents on the surface. Over time, the corrosion zone expands as rust penetrates deeper into the parts. This causes early equipment failure. There are several ways to clean a washing machine from rust.

How does rust appear?

The main reason for rust is the destruction of the protective layer of the housing, drum or tank. Destruction of the layer can occur due to physical or chemical effects on the surface of the parts. In addition to corrosion, on the surface of the drum, tank, powder compartments, rust may appear in the form of a coating consisting of calcium and iron salts. But the main thing is that no matter what the reason for the rust, it will not be possible to wash the clothes in such a washing machine until it is removed.

Ways to clean the outer casing

If rust appears on washing machine body, and the body is not rusted through, then it will need to not only be cleaned, but also painted. Cleaning and painting is carried out as follows:

1. The surface with peeling paint and traces of corrosion must be cleaned using sandpaper (80 grit is suitable) or a grinder.
2. Remove rust residues using a special “Tsiankovka” solvent.It is sold in spray form. The spray is applied to the cleaned surface and rubbed with a hard synthetic brush (an old toothbrush or one for cleaning clothes will do). Then wipe dry with a napkin.
3. Cover the drum, door and areas of the body that are not damaged by corrosion with cellophane or cloth to prevent paint from getting on them.
4. Warm up the surface with a hairdryer. Primer and paint adhere better to a heated surface and last longer.
5. Apply primer in two layers. Between the first and second, pause for 10-15 minutes so that the first layer has time to dry. For work it is better to use primer and paint in cans. They are easy to apply and dry quickly.
6. After the primer has dried, apply paint. The paint should be enamel for metal surfaces and the same color as the body of the washing machine. After a day, the machine can already be connected.

It is not uncommon to see traces of rust on the plastic parts of the washing machine. The appearance of brown spots and smudges can be either a sign of corrosion of the metal body or a consequence of poor quality water. Clean the washing mashine You can remove rust from plastic and return it to its original appearance using Domestos, Comet or Mister Muscle. Any product for cleaning the surface from scale and rust is suitable. Apply and rinse with a sponge after 5-10 minutes.

Rust inside the machine, how to fix the situation

A washing machine can become rusty not only on the outside, but also on the inside.This often happens if the operating conditions were violated or the manufacturer decided to save on the material from which the drum and bolts are made that secure the internal parts and therefore experience the aggressive action of water and detergents. You can get rid of rust on the drum or bolts, if they appeared due to the manufacturer using cheap low-quality materials, only by replacing these parts with higher quality ones.

To violations operating conditions This also includes a discrepancy between the quality of water that flows from the tap and the requirements of the equipment manufacturer. This refers to the content of calcium, iron, phosphorus, etc. salts in water. Under the influence of high temperature, they are released from the water and settle on the walls of the drum, heater, tank, washing powder compartment, forming plaque. The first layer of plaque is dense, while the second and third are loose. It is formed not inside the drum, but on its outer side. During rotation, particles of the loose layer fly off and, together with water and detergents, fall on clothes. As a result, things become covered with brown traces of rust and scale.

Complex types of pollution

It is not always possible to get rid of rust stains on clothes using the above method.If the washing machine has been used for a long time, but is rarely cleaned, and the operating rules are not followed, then over time a lot of garbage can accumulate inside it. The garbage clogs the filter

and the outlet valve. As a result, the water slowly leaks out, and the garbage, including rust flakes, remain inside. You will have to clean the filter, tank, valve and cuff from dirt and garbage. They can only be removed by disassembling the washing machine.

• Signs of rust inside the machine
• In addition to the appearance of characteristic brown spots on washed items, there are other signs by which you can determine that the washing machine, albeit slowly, is rusting from the inside.
• The appearance of rusty streaks on the plastic panel of the washing machine, the compartment for powders and gels, the tray.

The appearance of rusty stripes and stains on the cuff.

Red stripes and stains on the drum.

One of the first signs of the machine's destruction from the inside is the appearance of an unpleasant smell. This happens because debris accumulates inside the washing machine, which prevents excess moisture and detergents from being removed from it. As a result, an aggressive environment is formed inside the device, which leads to the oxidation of the internal iron elements. If the drum is not made of a solid sheet of stainless steel, but has only a stainless coating, then if it is damaged, traces of corrosion may appear. Prevention Rust on the washing machine appears when the

• operating and storage conditions of the device are violated
• There are simple rules that must be followed so that the washing machine lasts as long as possible.
• The room where the washing machine is located must be ventilated. This is necessary so that the humidity in the room where the device is located is not high.If the washing machine has been used for a long time, but is rarely cleaned, and the operating instructions are not followed, then over time a lot of debris can accumulate inside it.
• Debris clogs the filter
• and outlet valve. As a result, the water slowly seeps out, and debris, including rust flakes, remains inside. You will have to clean the filter, tank, valve and cuff from dirt and debris. They can only be removed by disassembling the washing machine.
• Signs of rust inside the machine