How to remove the powder tray in a washing machine?

Almost every housewife knows how to remove the tray from the washing machine, because in traditional versions of the device the powder container is located in the center and is equipped with a special lock, by pressing on which you can begin to pull and then remove the tray (LG, Bosch). But there are also washing machines with a slightly different design.

Why is the tray removed?

All equipment needs quality care.

The tray, of course, is not considered the main element in the machine, but its contamination can cause the washing machine to break down. Clogging of the powder container is caused by the fact that after washing the powder is not washed out of the container well enough. This is due to a number of reasons:

1. Poor quality detergent. The cheaper the powder, the more of it will remain on the walls of the tray.
2. Use of powdered product. Due to their structure, liquid detergent components are washed out much easier.
3. Weak water pressure.
4. The rinse aid contains surfactants that form a film on clothing and the walls of the container.

Working with an Indesit machine

Remove the tray from Indesit machines It's hard enough. That is why many housewives, trying to get a container for detergent, simply uprooted it. Of course, you can study the description supplied with the device, but there this procedure is described so poorly and complexly that you can only rely on your own ingenuity.

Taking into account the presented nuances, you should remove the tray from the washing machine of this company in stages:

• the container stretches towards itself to the maximum, it is necessary to ensure that it becomes visible from the outside;
• you need to sit down and examine the bottom of the tray; there should be teeth on both sides that prevent you from removing the container - they should be greased with sunflower oil;
• you need to hold the body of the tray with little effort, lift it up and towards you, as a result, the tray moves a few centimeters from its place (during this action, the 2 upper teeth are removed, preventing the removal of the container);
• you need to grab the body of the container and press on it, the container should move down and make a click;
• the container extends at a slight angle - you need to continue to press on it and simultaneously pull it towards you, after a few seconds it will pop out.

Removing the tray from the Ariston machine

Peculiarity Ariston washing mashines is that here the powder container is removed like a fan.Considering this fact, all manipulations must be performed with extreme caution, because if you pull the container hard, you can break the outer part of the tray, which can lead to further spillage of detergent on the floor and the need to completely replace the part.

But if you follow the presented plan, then the container can be removed without damage:

• the container is removed all the way;
• you need to grab the edge of the tray on the right and lift the container up a little;
• The container is pulled towards itself and removed from the washing machine.

Despite certain difficulties with removal, the tray in the Ariston machine is quite convenient, since there is a clear division into a section for conditioner and powder.

Things are much simpler with company machines Samsung or Ardo, they have a standard design.

Simplify tray removal process

After you have managed to remove the powder container from the washing machine for the first time and remove dirt from it, there is no need to rush to put the container back in place. This is explained by the fact that the secondary procedure for removing the container from the machine may also be accompanied by problems due to the same teeth.

Thanks to these actions, the container will be easier to remove and it will not jump out on its own if you pull it a little harder.

Features of cleaning the container

Having figured out how to remove the tray from washing machines of different companies, you should familiarize yourself with the features of cleaning it. Today, the market offers a wide range of cleaning products that simultaneously destroy mold and plaque. If household chemicals do not inspire confidence, it is quite possible to use folk remedies:

1. Soda. Mix soda and water in equal quantities, and then pour the prepared product into the tray. The container is cleaned with the hard side of the sponge. This way, you can remove mold and remaining detergent in a short time.
2. Soda with vinegar. Pour soda into a container and pour 9% acetic acid on top. A reaction occurs between these components, as a result, the dirt moves away from the walls and is easily removed. If there is a slight effect, the action can be repeated.
3. Lemon acid. This product is widely used for cleaning the tray and rinsing the tubing systems that supply cleaning components to the drum. For these purposes, acid is poured into a cuvette intended for powder, and the idle washing mode is activated, the temperature should be 60 degrees. Using heated citric acid, scale is removed with great ease, and you can also get rid of powder and mold residues. A pleasant smell is an added benefit.
4. 9% table vinegar. The container is removed from the washing machine and placed in a basin. Then, a liter of boiling water and 200 ml of vinegar are poured into this container. Exposure time is more than 6 hours. After completing these steps, you can remove the scale with a simple washcloth.

Preventing the emergence of new contaminants

Having figured out how to remove the tray and what means you can clean it with, you should pay attention to preventive measures. The best option for keeping the container clean is scheduled maintenance of the SMA and following the instructions for using the device. You also need to follow a number of simple recommendations:

• install a filter in the machine that reduces water hardness;
• use only high-quality detergents;
• After each cycle, leave the machine open, this will help dry the internal parts of the device.