In a country house or village there is often no centralized water supply. This makes it seriously difficult to connect a washing machine without running water. But, despite this, even without access to the central water supply, you can connect it. To do this, it is worth considering some nuances that will help in connecting the machine. This ensures reliable and high-quality operation of the resulting structure.
In what cases is it necessary to connect a washing machine without running water?
In places without a central water supply, washing machines are used relatively rarely. They usually use old manual washing machines. However, a washing machine without running water is still necessary.
For example, a lot of dirty things have accumulated in the house, but there is almost nothing clean left. Then an automatic washing machine will be very useful. In order to mount it, you will have to work hard. But the result will pay off in the long run.Of the main advantages of a washing machine in a village or country house, the following should be noted:
- It is possible to use rainwater. It is much softer and washes things more carefully. And the quality of such washing will be much higher.
- Having a well allows you to avoid paying for water. You can do laundry almost every day without causing significant damage to the environment. This is especially true for large amounts of clothing.
- And finally, you can send an old unit that is still in working order to the dacha. This is especially true if a new washing machine was purchased to replace it. Old devices in dachas will last a very long time.
These are not all the advantages of using washing machines in the countryside. But before that, you should think about connection methods. After all, its performance and durability depend on how well the washing machine is connected. Moreover, many simple and reliable methods have been invented.
Methods for connecting a washing unit without running water
Filling with water through the detergent container
Experienced craftsmen know one famous tricky way. It consists of filling the detergent container with water. It is easy to use and does not require complicated steps. But its disadvantage is that it is necessary to restart the washing mode constantly.
That is, a person must open the container, place the powder in it, then put the laundry into the drum. After this, the wash starts, water is added, and the machine is stopped. Then the washing begins again, at the end the water is drained and the process is stopped.
Despite its simplicity, this method is irrational. It is time-consuming and does not always guarantee reliable results.In addition, not every machine is capable of working at such a rhythm on a regular basis. Therefore, it is worth considering other methods.
Using a water container
To avoid using the previous method, it is worth considering the simplest water supply method. This can be called installing a tank with a container above the washing machine. It looks interesting and seems to solve the problem for a long time.
But there is a certain nuance here too. This is not very easy to do in practice. After all, this requires a container with a volume of 10 liters or more. It is then that the necessary pressure of 1 bar will be provided to raise the water into the washing machine.
In this case, you need to regularly carry water to the second floor for the mechanism to work. But in winter and in an unheated room, this option disappears. The problem can be solved by purchasing a machine with a tank, but you need to look at whether it will fit the size of your site.
Using a well
Many homeowners, not having the money to drill a well, prefer to use wells. They are built from polymer pipes or reinforced concrete rings. Water is extracted using pumps or gates.
The question immediately arises of how to ensure an uninterrupted supply of water. Without this, it will be almost impossible to carry out the washing process. You can use the following popular methods:
- Construction of a water tower with equipment. This includes a centrifugal pump and a heating system. This will allow you to receive water even during frosts.
- You can ensure an uninterrupted supply of water through a large tank. To do this, install an automatic pump, which is activated when there is pressure in the system.
- And finally, manually pouring water into the container.But this method is very unreliable and requires constant presence when washing. A plus is the absence of the need for spinning and other manipulations.
However, well water is not suitable for home use. It contains mineral and chemical impurities, and there is also the possibility of feces. Therefore, it is important to use special filtration systems that can remove any impurities and dirt. Otherwise, there is a possibility that the operation of the washing machine and all equipment in the house will completely deteriorate.
Well drilling
This method is suitable for wealthy owners. The natural well is equipped with a pumping station operating in automatic mode. Then the procedure for installing a washing machine will not differ from a similar process in a city apartment.
The disadvantages of this solution are the high cost and composition of the water. The aquifer can lie very deep. Then drilling and further connecting to the well all the elements necessary for this can cost a significant amount. In addition, the water from the well contains many mineral salts and mechanical impurities, which will quickly damage the equipment. The problem is solved by installing powerful filters.
However, having your own source saves you from solving problems with connecting the washing machine for several years. You can also sell excess inventory. To do this, you need to register as an individual entrepreneur.
Using a washing machine with a built-in tank
Often in homes there is no opportunity to install a separate container. Then the solution would be a washing machine with a tank. Initially it was intended for a mobile type of household, then they were adapted for stationary houses.Despite the increased cost, they have proven themselves well.
The design of such devices includes a tank, which also contains a pumping component in the form of a relay, pump and sensors. Therefore, no locking elements or containers are required here. They differ from conventional washing machines only in size. Moreover, their functionality is almost identical.
Connecting a pump for a washing machine
Pump operating principle
The principle of operation of the pump is that water enters the washing machine not by gravity, but by the movement of the motor. Therefore, the barrel does not have to be dragged upstairs, but can be placed next to the washing mashine. The tank must have a tap.
It is used to connect a hose to inject pressure. A running engine helps provide the necessary pressure to operate the intake valve. This simulates water pressure. This method is quite rational, and at the same time relatively inexpensive, because only a pump and a barrel are required.
Preparing the necessary tools and materials
After reviewing the operating principle of the pump, you can begin to prepare tools and materials. Before starting work, you must have a tape measure, a wrench, pliers, and a building level. You will also need to find a knife and an indicator screwdriver.
They can be found in your own home. But the remaining materials will have to be purchased in the appropriate stores. To install a pumping station you need to buy:
- A tape that is used to seal all necessary mechanisms.
- Solenoid valve.
- Hose with special filters.
- Three-quarter inch tap.
- Clamps and rubber gaskets.
- And directly the pump of one brand or another.
The length and diameter of the hose with the tap configuration are determined taking into account the features of the washing machine. In each case, individual difficulties are possible. Therefore, it is worth carefully selecting all the elements for the station.
Connecting the pump yourself
So, all the necessary tools and materials are available. Now you can start working on connecting the pump. The procedure for connecting a device is as follows:
- Using a level, place the machine on a level surface. There must be a 220 Volt outlet nearby.
- Then install a tank with a capacity of 50 liters or more. For ease of filling, it is better to use a tank with a hinged lid.
- Make a wooden stand for the barrel. And make a hole on the side where they put the rubber seal and tap. That, in turn, must have high reliability and fit tightly to the surface.
- A pump is connected to it, and a hose is connected to the latter. The latter is also connected to the washing machine through an appropriate adapter.
- The top of the machine is removed to remove the sealing rubber. This procedure will ensure operation at lower pressures. Then you need to put a flow filter in front.
After all operations, you can begin full testing of the resulting system. It is also worth noting that the cost of a conventional pump is 1,000 rubles. For full compatibility, the brand and the washing machine must match.
Pump automation
Not all people like to stand near the washing machine when starting to wash. Therefore, for convenience, you can automate the pump. To do this you need to perform the following manipulations:
- The machine must be tilted forward slightly.
- On the device, find the wiring from the inlet valve, which is located next to the inlet hose.
- Then the two existing wires are cleaned.
- The wiring is pushed through the technical hatch at the back of the washing mashine. They are soldered to the same elements from the valve.
- After this, the connection must be isolated.
Now you do not need to control the pump operation process. Disabling and enabling will occur automatically. The valve will open when water needs to be added. The supercharger is turned on to create the required pressure. After this, the valve will close again and the pump will turn off.
Conclusion
Now, having knowledge of how to connect a washing machine without running water, you can carry out the procedure yourself. If there are difficulties, you can purchase a machine with a tank and a pump. Knowing all the nuances of installation and operation of such devices without a water supply system, you can ensure the devices long and flawless service. At the same time, the choice of one or another method by which the washing machine is connected remains at the discretion of the homeowners, including their financial condition and the size of the plots.
