Not all owners of washing equipment know how much powder to pour into an automatic washing machine so that the washing effect is as good as possible, the internal parts of the unit are not damaged, and the family budget is saved. In most cases, the amount of powder is determined approximately.
Quite often you can see this picture - the laundry is either not very clean after the wash cycle, or there are particles of powder left on it. There are two reasons for this - the wrong operating mode has been selected, or the wrong dose of detergent has been selected.
And if everything is clear with the first point, then the second can cause confusion and even seem stupid. However, there are several factors that should be taken into account.
Calculate the dosage of the product
Often, consumers believe that there is one condition - the more, the better. Probably, in other circumstances this rule works, but not here. The fact is that the volume of detergent will not affect the final result.
Excessively used powder can cause negative consequences:
- leave behind marks on clothes - white stains;
- poor rinsing of the powder tray leads to clogging;
- a not very pleasant smell appears from the machine drum.
What does the manufacturer recommend in such situations?
We suggest you figure out what you need to pay attention to when filling the receiver of the machine with powder:
- The condition of things is assessed - dirtiness, stains on them. It is necessary to understand that quantity does not always have a good effect on the final indicator. Sometimes it is necessary to add a stain remover to the powder;
- The level of water hardness also has an impact. Everyone knows that in harsher moisture, foam is poorly formed, which also negatively affects the final indicator. For this reason, many manufacturers mix softeners into powder formulations;
- a serious argument in determining the dose of the product is the volume of laundry requiring washing;
- rate of water use for each work process. The water volume used by the machine when performing a given process will depend on the specific mode and type of material.
What to trust – the label or the container markings?
The packaging of the purchased detergent must contain information on its use.
First, it is recommended to make sure that this particular chemical composition is allowed to be used in the machine. A special sign will inform you about this. Otherwise, hand washing powder can simply ruin the unit.These products produce a lot of foam, which can get on the engine and damage it.
Do not use chemicals that contain solvents - they are considered explosive. And if the powder contains chlorine, then the rubber parts of the washer are in real danger! Therefore, when purchasing powder, carefully study all the information provided by the manufacturer.
Any machine with automatic mode has a container for powder. For ease of use, it has a special mark indicating the amount of detergent to be added.
But you should not rely on it completely, since the amount of detergent depends on certain features, which include the load level and the degree of soiling of the laundry. They constantly vary, which means that in each case a certain dose of powder will be required.
In addition, laundry detergents are divided into simple and concentrated, and they also need to be added in different ways.
Degree of contamination of things and water quality
Often, the powder manufacturer recommends using the product in the following quantities:
- about one hundred and fifty grams per wash;
- up to two hundred twenty-five grams - if there are difficult to remove stains on things.
Almost any package indicates that this flow rate is intended for water that is soft or medium hard. In other situations, it is necessary to add up to twenty grams for the next work process. But we have already said that the manufacturer deliberately inflates consumption rates.
It is not wise to use powder in larger quantities than required, since this will not affect the quality of washing. But if the water is hard, then it is better to add a couple of tablespoons of ordinary soda, which can have a softening effect and help the powder dissolve better.
Water consumption when washing
The volume of powder is calculated so that the washing quality is good. Excess detergent may not be completely washed off and leaves white streaks on things. To prevent this, you should take into account how much water will be consumed in one process.
Washing machine energy efficiency
Different machines have different volumes of water and depend on the capacity of the tank and the complexity of the software with which the unit is equipped. On average, a standard machine, the maximum loading volume of which does not exceed seven kilograms, uses up to sixty liters of water.
As a rule, information about all standards is available in the accompanying operating instructions. If you study them carefully, it turns out that the machine uses six buckets of water to wash a three-kilogram volume of laundry, and the same amount for a six-kilogram load.
Let us add that if the machine has a function for weighing things, then based on the data received it is possible to navigate the actual weight of the laundry. While washing, the equipment will independently assess the severity of the load and fill the working body according to the data received.
Type of washing powder
Today, taking into account individual wishes and comfort, consumers try to purchase the product in powders, gels, capsules and even tablets. Then the flow proportions will be changed.
In the last two cases, everything is much simpler - one dose per wash cycle. But with concentrated gel formulations the situation is more complicated.
If you follow the manufacturer's advice, you should pour up to one hundred grams of gel per load. But this approach forces you to spend an increased amount of money and, as a result, purchase it more often. And the likelihood of stains appearing on things is quite high.
Experts advise using a different consumption rate - pour no more than one tablespoon of product per wash. If the water is very hard, then the consumption rate can be doubled.
Powder consumption for different washing technologies
Today's washing machines are equipped with the most advanced technologies that save water, electricity and detergents.
samsung eco bubble
Similar functions include:
- Eco Bubble;
- steam wash.
Washing in the first case is based on mixing the powder in a special foaming agent, in which air bubbles influence the mixture of water and product. Only after this does the foam begin to flow into the drum. This allows the powder to dissolve completely without leaving any particles on things.
In the second case, steam is supplied to the product. With its help, even the oldest contaminants are broken down. Steam helps the powder dissolve better and gives the wash a greater effect.
There is no need to pre-soak the dirtiest items or increase the consumption of detergents. And the water warms up to the temperature that you set.
When washing with steam, items are disinfected and almost all allergens are destroyed.
Conclusion
When deciding to wash, few people think about how much product should be put in the container. As a rule, most rely on the recommendations written on the packaging container by the manufacturer. But if you study in detail all the features that affect the process, you will be able to save a lot of money.
Remember that you should not only correctly combine detergents and special formulations, but also sort the laundry before the process and select the correct operating mode for the machine. These measures will allow your items to last much longer.
