Washing machine Samsung WF8590NLW9 – instructions

3 comments
CONTENT

ExploitationSo, you can be congratulated on your successful purchase of household appliances from the famous Samsung brand. In this user manual, we will introduce you to the operating instructions for the Samsung WF8590NLW9 model, tell you how to install it, care for it, as well as rules for the safe use of equipment.

Safety regulations

The instructions for safe use should be read first.

User manual Samsung Bio Compact S821

Measures to avoid injury and fire

  • It is not recommended to allow people with disabilities, children, or people who have no experience in handling this type of equipment to use the machine. All such persons are permitted to use the device only under the supervision of others. They can also use the washing machine if they have received the necessary operating instructions.
  • Children are prohibited from playing with or near equipment.
  • If the power cable is broken, you need to call a specialist. There is no need to do this yourself.
  • If this happens, new hoses must be used. Reuse of old hoses is prohibited. New ones are supplied with the device.
  • Carpet runners should not block ventilation openings if they are located below.
  • It is not recommended to connect the washing machine to an electrical outlet that may be switched off by other devices. Otherwise, breakdowns cannot be avoided.

 

Safe Installation Guidelines

  • The washing machine is very heavy, do not carry it alone, have the help of others.
  • The unit must be installed by the service personnel of the store where the equipment was purchased. If you do not follow this rule, your risk of injury increases. A fire may occur or the unit may have difficulty operating.
  • Tees and extensions must not be used. Plug the power cord into a specific outlet. The socket must have a voltage of 220 V, a frequency of 50 Hz, and a current of 15 A or higher.
  • Make sure the plug is firmly inserted into the outlet. If there is dirt, clean the fork using a dry cloth.
  • The cable must run along the floor. If the rule is not followed, the wires in it may be damaged.
  • After unpacking the device, keep the packaging materials away from children.
  • If there is any damage to the plug, socket, or cable, you should contact service for help.
  • -The socket for connection must comply with regulations and be grounded as required.
  • Do not install the unit near electrical appliances or flammable materials.
  • Do not install in damp, cold rooms, in places where the machine will not be protected from rain and other natural phenomena.
  • The use of electrical transformers is prohibited to avoid fire or electric shock.
  • Do not operate if the cable or hoses are damaged.
  • Handle the cable carefully. It should not be bent or tangled. It is necessary to exclude its interaction with metal objects.
  • When unplugging the plug from the socket, do not pull the cord - just hold the plug as you pull it out of the socket.
  • Cables and pipes must be installed in such a way that they cannot get caught.
  • The washing machine must be installed on a strong and level floor.
  • Before installation in a permanent place, you need to remove the materials that are attached to the bottom of the machine.

 

Rules for emergency situations

In case of flooding, you need to turn off the water and turn off the washing machine from the network. Never touch the plug or socket with wet hands.

If smoke appears from the unit, or it makes strange sounds and smells, then you need to urgently notify the service center.

If a gas leak occurs, do not touch the device or its other components. Ventilate the room by opening the windows. A fan cannot be used in this case.

Do not allow children to climb into or onto the machine drum.

 

Prohibited:

  1. Washing items that are contaminated with flammable substances.
  2. Open the hatch door during washing. The water will spill onto the floor and you may get burned by the hot water.
  3. Touch the cable with wet hands.
  4. Unplug the plug from the socket during the process.
  5. While the machine is operating, place objects and hands under it.
  6. Turn on the device with a damaged cable.

 

Precautions for use

  1. If contaminated with various substances, turn off the machine and clean it.
  2. When loading dirty items into the machine, make sure it is fully loaded. The door should close completely and not trap things.
  3. When the machine is turned off, the water tap should also be turned off.
  4. If the rubber gasket becomes dirty, clean it.
  5. If a drain error occurs, check to see if there is a problem.
  6. The machine should only be used at home.
  7. When operating the machine, remove foreign objects from it.
  8. There should be no devices with electromagnetic radiation near the machine.
  9. Do not touch the water that is drained after a high temperature wash cycle.
  10. You cannot turn on the machine if there is no dispenser.
  11. It is prohibited to wash shoes, animals, rugs, or things contaminated with substances from cosmetic substances.
  12. To avoid rust, do not leave metal objects in the drum.
  13. Do not use dry cleaning detergent.
  14. Check the pockets of items before loading them into the tank.
  15. Do not use hardened detergents or soaps.
  16. Do not clean the washer with solvent or other similar products. Remember to unplug your device while cleaning it.

 

Installation

Since the installation of the device must be performed by a specialist, he must follow certain rules to ensure proper operation of the equipment and avoid breakdowns and injuries. After unpacking the Samsung WF8590NLW9 washing machine, check all the parts and make sure everything is included.

Required Criteria

Power supply: The mains connection must comply with the latest regulations, as well as the grounding. The use of extension cords and tees is prohibited. The washing machine must be sufficiently grounded. This reduces the likelihood of electric shock in the event of a breakdown. It is better to consult a specialist if you are not confident in your abilities. If the plug does not fit into your socket, then also call a professional to install a new socket. In general, it is better to resolve all electrical issues with a specialist. It is not recommended to do everything yourself.

Water supply:at a water pressure of less than 50 kPa, the probability of a malfunction increases - the valve will not close completely. Therefore, the water pressure should be 50-800 kPa. The water tap should be located near the back of the machine body to ensure the operation of the hoses. Before using the device, check the hoses and valves for damage - otherwise leaks cannot be avoided.

Drain: A 46 cm long water pipe is used. The drain hose is laid through the clamp to this pipe.

Floor: The surface under the machine must be solid and level. Do not install the machine on carpets. In this case, ventilation is disrupted. When installing the unit on wooden floors, they will need to be reinforced in advance.

Temperature: Do not install the machine in cold places where the ambient temperature is below zero. In this case, the water, which always remains in the device in small quantities, will freeze. Ice in the inside of the machine will lead to disruption of operation and inevitable breakdowns. Correct installation of the unit

 

It starts with choosing a location. The location where you plan to install the device must meet some of the requirements we discussed above. Let's repeat them again:

  • level surface, no carpets;
  • protection from direct sunlight;
  • temperature not below zero;

good ventilation;

absence of flammable materials;

2 comments

spacious area.

After you have chosen a location that meets the rules, we proceed to remove the transport elements. On the back panel, you need to unscrew 5 bolts for transportation. They are unscrewed with a key and plastic plugs are inserted in their place. when the water pressure is less than 50 kPa, the likelihood of a malfunction increases - the valve will not close completely. Therefore, the water pressure should be 50-800 kPa. The water tap should be located near the back of the machine body to ensure the hoses work. Before using the device, check the hoses and valves for damage - otherwise leaks will occur.

 

Drain:

A 46 cm long water pipe is used. A drain hose is laid through the clamp to this pipe.

Floor:

The surface under the machine must be hard and level. The machine must not be installed on carpeted floors. In this case, ventilation is disrupted. When installing the unit on wooden floors, they will need to be reinforced in advance.

Temperature:

Do not install the machine in cold places where the ambient temperature is below zero. In this case, the water, which always remains in small quantities in the device, will freeze. Ice in the inside of the machine will lead to malfunction and inevitable breakdowns.

 

 

Correct installation of the unit
Exploitation
How to secure a washing machine to tiles so it doesn't wobble
1 comment
Exploitation
good ventilation;

Operating instructions for the Bosch Maxx 4 machine absence of flammable materials;
Once you have chosen a location that complies with the rules, we proceed to remove the shipping elements. On the back panel you need to unscrew 5 bolts for transportation. They are unscrewed using a key and plastic plugs are inserted in their place.Do not throw away the bolts; you will need them during transportation.

1 comment Now we adjust the height of the legs. This is necessary to provide access to the hoses, drain pipe and cable plug. When you reach the desired height, tighten the nuts on the legs.
First we connect the water supply hose. It must be connected to the cold water supply hole on the back of the washing machine. The other end of the hose is connected to a water tap. Be sure to tighten all connections.

Recent Entries Next we connect the drain hose. There are several ways to place the end of the drain hose, such as in a bathtub or sink.
When you have connected all the hoses, you can turn on our device to the network. To start washing things consistently, you need to run a test wash. To do this, select the RINSE+SPIN program. This will check whether you installed the machine correctly.

Living outside the city: advantages and features of buying cottages in Kaliningrad Washing process
After completing the test wash, you can begin using the unit regularly. We begin the first wash of our clothes. First you need to sort your things. This is necessary to maintain the quality of the laundry and good washing results.