Errors E1 and 4C on a Samsung washing machine

If you purchased a wonderful Samsung washing machine, and after some time a breakdown occurs, you don’t need to be upset, because you can fix the cause yourself. The manufacturer has made sure that it is easier to find the breakdown using the code on the display. From this article you will learn what the E1 error code means in Samsung washing machines and how to fix the problem.

Causes

Error code E1 can appear in any washing mode. There are cases when it appears immediately after the machine is turned on. Most often, the code is displayed on the display in the following cases:

• when the washing machine is getting ready for use, in the process of drawing water and washing off the powder from the cuvette.
• error E1 may appear during rinsing when drawing clean water.
• If there is a mode such as re-rinsing, then an error may appear on the display.

Everyone should know how to recognize the E1 error on a Samsung washing machine that does not have a screen. You need to pay attention to the fact that the lamp near the cold water sign is blinking or just lit.

You need to know that error E1 has analogues. This is all because there are different Samsung models, they all have different self-diagnosis codes. Error E1 on a Samsung washing machine is similar in decoding to codes 4E, 4C and CHE. Even with modern washing machines, the E1 error code is practically not displayed on the display.

Error 4C on Samsung washing machine

Error codes E1, 4E, 4C and CHE are all similar in meaning. The cause of the breakdown is the problematic flow of water into the tank. This may seem simple, but no, when a Samsung washing machine behaves this way, there can be many more reasons for the problem. Both errors and various failures in the system can occur. The first thing you need to do is find out why this happens.

If the water supply does not flow, then, naturally, Samsung washing equipment will not be able to draw liquid and error E1 will appear on the screen. There is often a water outage, and this can happen at the moment when a person is about to do laundry. It may be that the tap that supplies water to the Samsung washing machine is closed. It is also possible for the Aquastop system to be triggered if the washing machine has one. It should be noted that all modern washing machines have this function; it helps to avoid leaks. It is necessary to immediately check the Aquastop system. To find out if your Samsung washing machine has protection against water leakage, you need to look at the inlet hose and you will see an indicator there.

It happens that the inlet valve filter of a Samsung device becomes clogged. It is installed in the inlet pipe where the valve is located and a hose is attached to it, which supplies water to the Samsung washing machine. There is a mesh there, and it can become clogged with all sorts of debris that arises due to poor quality water. As a result, fluid intake is difficult. As a result, error E1 is displayed, as well as its analogues.

There may be a temporary malfunction in the modular control of the Samsung device. As a rule, this problem can be solved by restarting the washing machine. The E1 error code may still appear a few times, but more often than not it will simply disappear.It may be that the contacts have oxidized or the wiring has burned out. This problem can also cause a short circuit.

This can lead to a fire not only of the Samsung washing machine, but also of the whole house. The intake valve could have burned out; this problem is also shown on the display, with codes such as: E1, 4E, 4C, CH. This means that a burnt out valve is unable to open and close. Therefore, most often, error E1 is displayed immediately at the beginning of the wash.

There may also be problems with the modular control of the Samsung washing unit if water somehow got into it or there was a short circuit. There are also cases when a manufacturing defect is discovered in the electronics of a Samsung washing machine. To find the cause of error E1, it is best to contact a good specialist. After all, if a person does not have experience in repairing an electronic module, he can only break it.

How to fix problems

It remains to talk about how to fix error E1. First, you need to figure out why the Aquastop hose in the Samsung washing machine suddenly became damaged. It is necessary to determine whether the leakage protection has worked; for this you will need to find a special indicator. If protection occurs, the hose must be replaced. In order to change it, you need to turn off the tap, remove it, and then install a new one. This seems easy at first glance, but in reality there can be problems with the length. Therefore, if you cannot find a suitable hose anywhere, most likely you need to contact a specialist to eliminate the cause of the E1 error.

The mesh located on the intake valve filter is easy to clean. The first step is to turn off the tap.You need to start unscrewing the hose from the Samsung washing machine. And from the place where the connection with the body occurs, you need to remove the mesh.

You need to put it in a solution made from citric acid for about thirty minutes. Then rinse the mesh thoroughly with running water, then put it back in place. After cleaning, you need to screw on the inlet hose of the Samsung machine and open the tap. After this procedure, error E1 should completely disappear from the washing machine display.

If a breakdown occurs in the inlet valve wiring, you will need to disassemble the washer to carry out repair work. First of all, you need to completely disconnect your Samsung washing machine from electricity. Next, open the cover to correct error E1 and find the inlet valve. Use a multimeter to check the wire that goes to the valve, and also use this device to check its functionality. If it is no longer suitable for use, you need to buy and install a new one.

If the electronic module of a Samsung machine breaks down, it is not recommended to repair it yourself. If you have no experience in this, it is best to call a good technician to eliminate error E1. This will save money, since doing it yourself can only make the problem worse.

Preventive measures

If your Samsung washing machine breaks down quickly, then most likely you purchased a low-quality product. Price and proper care do not affect the long life of the product if the purchase was defective. If the first breakdown occurs after five or six years of use, then this is normal. Because all parts of Samsung washing equipment wear out over such a long period of time.In order for the washer to serve for a long time, it is necessary to properly care for it. The case should be wiped from different sides with a damp sponge and then the moisture should be removed dry.

It is necessary to monitor the weight of the clothes that need to be washed. Wearing clothes that are too heavy will damage the mechanism and may cause damage. Also, do not forget that after each wash you need to leave the door of the Samsung unit open. If moisture does not evaporate, mold will appear. If you have hard water, you should also use a special descaling powder at least during washing. This will help avoid plaque formation.

If it happens that the washing machine displays error code E1, this means that it cannot fill the tank with water. Why such a breakdown occurred, you will need to figure it out yourself or call a professional.