Indesit is one of the most popular and well-known brands producing household appliances. Such washing machines are distinguished by their affordable price, high-quality washing, and very easy repairs. The best thing is that the washing machine itself shows what problems and breakdowns have arisen and what needs to be done next with it. The failure makes itself known by beeping and flashing. More rarely, such signals are absent, but the display will still show a malfunction in the form of an error code. Next, you will find out what error F08 means on an Indesit washing machine.
Causes
Error F08 indicates that there is a danger. A fire may occur, and it is good if the damage is caused only to the body and parts located inside the machine. But there are also situations when no one was at home, and the machine was washing things, and a breakdown occurred, causing error F08 to appear. To prevent the fire from engulfing the entire house, owners should not leave the laundry and leave for a long time.
If Indesit washing equipment displays error F08, you can try to inspect all the contacts that are responsible for control. A software failure may have occurred, which means that the washing machine needs to be rebooted. When error F08 appears, first of all you need to disconnect the Indesit machine from the power supply and leave it for about 15-20 minutes. Then turn it on and check if it works. Most likely, error F08 will be resolved.The problem may also be that there is incorrect water supply and pressure. It is still worth making sure that the Indesit washing equipment is in a dry place.
If it happens that the washing machine still displays error F08, then you need to disconnect the Indesit washing machine from the power supply, because you can’t use it anymore, it’s dangerous.
It is important to understand what needs to be done if error code F08 is displayed. First of all, you need to find out how the F08 code is deciphered. It appears on the screen when there is a malfunction in the temperature sensor or in the heater of the Indesit washing machine. Most likely, you will need to replace the heating element or temperature sensor.
The reasons for the appearance of error F08 may be the following:
- short circuit of the heater, as well as the temperature sensor;
- the control module of the Indesit machine is broken;
- engine failure or wiring problems, but this is rare.
If the Indesit washing machine does not have a display, then when error F08 occurs, the “quick wash” indicator lights up. A malfunction may occur in such a way that the washing machine stops heating the water or does not finish washing.
The heating element or temperature sensor does not work
First you need to check whether the heater is working, since everything depends on it, and you should also know how to fix the breakdown. It is necessary to ring the heating element on the body of the Indesit washing machine with a megameter. If the reading on the device is less than 20 mOhm, then all you have to do is replace the heater. If the magameter shows a normal value, then you will have to identify the cause in other ways. You will need to remove the housing on the back of the Indesit machine and the drive belt if it gets in the way. It is necessary to remove all wires from the temperature sensor and heating element, and also inspect everything thoroughly.
When a visual inspection is carried out, you need to pay attention to whether there is rust in the temperature sensor of the Indesit washing machine. It may cause a breakdown and the appearance of error F08. Still, if corrosion is detected, then it will be necessary to completely replace the heating element. Because if actions such as washing or cleaning are carried out, this will not give a good result for further work. You will need to buy and install a new and original heating element. This will allow the Indesit washing machine to operate correctly and for a long time.
Error F08 may also be generated due to contact oxidation. The Indesit washing machine is most often installed in areas with high humidity. It is located either in the bathroom or in the kitchen, where there is water supply and sewerage nearby; in such places there is always moisture. Moisture gets inside and after some time the cause of failure occurs due to oxidation. The error is corrected using a method such as replacing contacts.
If, however, the temperature sensor and heater are in order and working, then the cause of the breakdown and the appearance of error F08 may be rust. It happens that dust from the brushes of a commutator motor spoils the contacts even worse than corrosion. To find out exactly the reason, you will need to ring the engine of the Indesit machine. It is also necessary to remove it and check all contacts, including brush contacts. Blow and thoroughly clean. You will need to thoroughly check all the wires that go to the motor.
Control module and its breakdown
If you still cannot find the cause of the breakdown, and error F08 remains as before and causes discomfort, you need to know what to do.When it is not possible to understand what the problem with error F08 is, all that remains is to turn your attention to the control module, since it may be the cause of the breakdown of the Indesit unit.
At first glance, it seems that you can easily make repairs and fix error F08. But you shouldn't do it yourself. Because to repair an electronic module you need to have experience. There is a high probability that if you try to fix it on your own, the situation will get even worse, and the Indesit machine will break down completely. You need to think about this and better contact a professional, as he can easily solve this problem. It’s better to spend money on the services of a professional than to buy a new washing machine later.
Error F08 is difficult to simply fix if standard methods do not help. When all methods of fixing the problem yourself have been tried, it is not recommended to use the washing machine with such a malfunction. Repairs carried out at home can lead to serious consequences. If a person is not sure that he can solve the problem himself, he should not even take on it. Therefore, it is recommended to seek help from a specialist who can fix the problem. You should never leave your Indesit washing machine on when no one is home. Such actions can lead to fire and other unpleasant consequences.
