LG is a truly popular brand of washing machines. Units of this brand are popular and are found in the apartments and houses of a huge number of people. The washing machine gives us comfort and convenience, but at the same time it requires careful handling and regular maintenance.
Imagine the situation: you routinely load the washing machine drum with a batch of laundry, fill the detergent and rinse aid reservoirs, anticipating half an hour of free time. You turn on your favorite washing program and... something goes wrong. There is no usual sound, which is usually heard when water is filled, or the machine “slows down”. We see the ominous inscription “IE” on the screen. On LG models without an LCD screen, the error can be expressed in the simultaneous blinking of several indicator lights at once. Meet this IE error in LG washing machine.
What does the IE error report?
The combination of letters IE (Inlet Error) indicates that the LG washing machine did not do this during the period of time specified for collecting water.
One way or another, this error code always indicates that the machine does not have enough water to complete the selected washing mode.
Reasons for the error
When an erroneous code occurs, the machine emits a characteristic sound signal, as if raising an alarm cry. Don't worry too much right after this.Let's try to understand the reasons for the IE signal.
First of all, you should look at the instructions. However, its content on this matter is not very informative and understandable to the average user. Roughly speaking, the machine requires water because one of the following has occurred:
- its supply is difficult (the tap is closed). The simplest and most easily removable reason. This may be a planned or emergency water shutdown. Before you panic, you should ask the management company if the utility services are carrying out relevant work at your address. In addition, you should check all the taps inside the apartment. It often happens that before using the tap they forgot to turn it to the desired position. The same applies to valves located directly in front of the washing machine;
- The special start valve has failed. It may not work at all or open halfway, which also impedes the flow of water, and it does not fill the machine’s tank in sufficient quantities;
- The sensor responsible for determining the volume of incoming water has broken down. The characteristic sound of water is heard, but the error code flashes on the display;
- low water pressure (water flows in, but in small quantities);
- The inlet hose is not functioning properly (damage, bend or blockage, disconnection, incorrect installation). If irreparable damage to the hose is detected, it must be replaced;
- a malfunction occurred in the electronic module of the machine. This type of breakdown can “hit” any function of the washing machine;
- The water supply filter mesh is clogged. Small particles of debris clog the filter holes, making it difficult for liquid to flow through. If this reason is detected, the device must be cleaned.
The IE error can also occur due to user inattention or serious damage to parts of the washing machine.
It is possible that there may be several reasons at once.
No need to call a technician
If, when an IE error occurs, it becomes clear that the breakdown of parts is unlikely, and, most likely, the reason lies in a one-time failure of the electronics, a disruption in the water supply, but does not concern mechanical damage, then there is a possibility that the problem can be solved independently.
We call the master
If the unit requires professional replacement of parts, work with the “electronic brain” of the machine and certain skills, then it is recommended to call a trusted repairman. There are situations when it is better to entrust repairs to a professional, so as not to aggravate the problem and not increase the cost of repairs significantly. The cost of such repairs may depend on the model of the LG washing machine, the service life, as well as the number of manipulations performed and parts replaced.
Fixing the error yourself
To get rid of the error yourself, you need to clearly try to identify the cause of its occurrence:
- We check the availability of water supply. If this is a planned or emergency water outage, then we simply wait for the water supply to be restored;
- Pay attention to the valve that supplies water directly to the machine. The problem will be resolved if it is in the correct (open) position;
- look at the water pressure. The IE error may appear when the pressure is low. To normalize the operation of the washing machine, it is necessary to restore good water pressure;
- straighten and check for integrity the hose supplying water to the machine;
- We clean the filter mesh through which water enters the drum of the washing machine.It may be clogged with small debris found in tap water. Remove the filter and wash it. You can soak the mesh in a solution of citric acid for 30-60 minutes;
- Pay attention to the water intake valve. To do this, you need to remove the lid of the washing machine, check for rusty areas, and use a special measuring device (multimeter). Its display should normally show a value from 2 to 4 kOhm;
- If there is a malfunction in the water level sensor (pressostat), it is necessary to check it for blockages. When the tube becomes full of debris, water cannot flow into the drum and the machine cannot start washing. Here you can also use a multimeter measurement;
- We check for a failure in the electronic module: turn off the machine from the network, wait a few minutes (experts recommend at least fifteen) and connect it again. Thus, a kind of system reboot occurs. If this does not help, you need to inspect the block. If there are faults in it, dark lines will be visible, which are a sign of burning.
Preventing the occurrence of IE
To ensure that unpleasant surprises no longer arise, it is necessary to carry out a number of actions to prevent breakdowns. How to prevent the error from occurring?
First of all, you need to make sure that the water supply to the washing machine is correct. Sometimes incorrect installation becomes the root cause of the problem.
It is recommended to clean the mesh filter of the washing machine at least once a year, as well as the hose through which water flows. They tend to get clogged. This is quite fast, and the result will ensure smooth operation of the LG machine.
In order to prevent breakdowns of the electronic systems of the washing machine, it is necessary to pay attention to the power supply. It must be debugged. This will ensure smooth operation of all electrical equipment. If there is no stability of the electrical supply, it is recommended to use a special power stabilizer for equipment.
At least once a year it is necessary to clean a special water volume sensor - pressure switch.
It is necessary to monitor the serviceability of the valves that provide access to water to the machine. They must be in good working order and easy to move.
It is advisable to monitor the quality of incoming water. The durability of many parts of the washing machine depends on this. If necessary, it is recommended to use special water softeners.
You need to make it a rule to place things with empty pockets in the washing machine drum, and also make sure that foreign solid objects do not get inside. This will cause damage, which can be difficult and expensive to repair.
A forced stop of the washing process can be detrimental to the electronic system of the washing machine. It is worth remembering that such an action is extremely undesirable.
A washing machine, like any equipment, does not last forever, but you can make its service life as long as possible. To do this, you need to take preventive measures, eliminate malfunctions and other problems in work in a timely manner. It is also important to follow safety precautions when operating equipment and not leave the washing machine running completely unattended. The IE error in an LG washing machine, regardless of the reasons for its occurrence, means that the unit does not have enough water to start the washing or rinsing process.Remember that if the process of self-elimination is difficult, or you do not know where to start, the best option would be to call an experienced technician. similar entries from this section
