How to remove the top cover on Ariston washing machines

Like any other modern model of washing machine, Ariston can break down at certain intervals. Although washing machines of this brand are considered the most reliable and durable, they are not immune to various types of problems. This occurs due to wear and tear of individual components, or lack of proper care or failure to comply with operating requirements. From this article you will learn how to remove the top cover of an Ariston washing machine.

In what cases is it necessary to dismantle the top cover?

Depending on the type of fault, sometimes it is enough only remove the top cover for a preliminary assessment of the condition of the machine inside and subsequent simple repairs.

These types of repairs include:

unlocking the lock of a jammed hatch handle if there is no other way to open it from the outside;
replacement of bearings and seals;
failure of the water intake (fill) valve.

The need to remove the top cover also arises to solve problems with more complex repairs, for example, to troubleshoot a drum or motor. This type of repair involves disassembling the entire washing machine.

Methods for troubleshooting a washing machine at home

There are several ways to solve the problem of fault detection and troubleshooting:

Call a technician who will take care of all the hassle associated with disassembling the washing machine. He will conduct diagnostics, identify the breakdown, and carry out the necessary repairs. However, it should be understood that the work of a master can cost a lot of money, sometimes exceeding 50 percent of the cost of the machine itself.
The simplest, but at the same time expensive option is to replace the washing machine with a new one.
Simple repairs of such household appliances can be done by any owner who is not afraid to hold a screwdriver in his hand. Just follow the instructions for removing the top cover, which will be presented in the article below.

Preliminary stages of repair work

If you decide to inspect and repair the washing machine yourself, then when starting any repair work, you should never forget about safety precautions. The main mandatory steps prior to removing the top cover of the washing machine should be the following:

you need to turn off the power to household appliances by unplugging the plug from the socket;
block the access of water to the hose - close the corresponding valve. If complex repair work is planned, it is better to immediately drain the remaining water by unscrewing the plug located in the bottom panel of the machine, disconnect the drain hose from the sewer, and the water supply hose from the water supply;
provide unobstructed access from all four sides to washing machine. You need to move it away from the wall if it is located in the bathroom, or pull it out of a special cabinet-module if it is built into a kitchen unit. This is necessary in order to be able to reach the fasteners on the back of the machine;
get the necessary tool. In this case, you only need Phillips and straight screwdrivers;
Prepare a basin and old towels to remove residual water.

Instructions for removing the top cover from the Ariston washing machine

When starting the stage of detaching the top cover, you need to consider how the laundry is loaded into the washing machine. This means frontal (horizontal) or vertical loading. Accordingly, the methods of fastening for such modifications also differ. This is due to the design of washing machines, including Ariston. And also the impossibility of securing the top cover in models with vertical loading, similar to models with horizontal loading.

Step-by-step instructions for removing the top cover of front-loading Ariston machines

First, let's look at how to remove the top cover of an Ariston machine with horizontal loading:

on the reverse side, in its upper part, all existing screws are unscrewed. Their number may vary, depending on the specific model of Ariston machines, usually there are two. It is very important not to lose them during the work process. Therefore, first prepare a place to store them until the cover is installed back;
It is necessary for the fasteners to come out of the grooves, so the top cover moves slightly towards the rear wall and rises upward.

So, the cover is removed, and you can begin further repairs.

The scheme for removing the cover of a Russian-assembled Ariston washing machine - arsl 100 - is no different from the sequence of actions for other modifications made in Europe.

Step-by-step instructions for detaching the top cover of Ariston top-loading machines

In case we are dealing with machines that have vertical loading, you need to follow several steps that differ from the previous instructions:

in order to get to the fastenings of the lid, which in this case is hinged to remove laundry from the drum, you need to remove the control panel. Using a Phillips screwdriver, unscrew the two self-tapping screws located on the back wall of the machine.
after which, using a flat screwdriver, the panel is carefully lifted out of the special grooves and removed to the side. This must be done very carefully, trying not to damage the hanging wires;
After the panel is removed, you need to unscrew the four screws on the body of the washing machine, with which the top cover is attached to the body. They are located on opposite sides from each other. They need to be taken out, not forgetting to put them in a safe place so as not to be lost;
Finally, carefully remove the cover without damaging the latches with which it is inserted into the body of the machine.

In conclusion, we can say that it is quite possible to fix some minor breakdowns on your own. And in order to remove the top cover of any Ariston washing machine, whether with vertical or horizontal loading, no additional skills or the use of complex tools are required. In addition, this will help save money on calling a specialist.