During long-term use of the device, the user may experience that the buttons on the washing machine become stuck. This can happen for a number of reasons - improper operation, manufacturing defects, pollution, etc. You can diagnose and fix this problem yourself if you know how to do it correctly.
Causes of keys sticking
Typically, the keys on washing machines become stuck after the warranty period expires as a result of prolonged use of the household appliance. But there may be other reasons. Among them:
- Poor quality plastic. Constant touching and pressure on such material leads to it deforming and breaking. To fix the problem, you will need to replace such buttons.
- Defective equipment. One of the common problems. If it appears while the washing machine is under warranty, you must contact the product manufacturer or service representatives.
- The keys are not installed correctly. This happens if the previous repair of the washing machine was carried out by non-professionals.
- When transporting the equipment, transportation rules were not followed or mechanical damage was caused to the device.
Need to know that keys sticking does not appear on equipment of any specific brands. This malfunction is typical for machines of any company, be it Kandy, LG or Siemens.
Which keys get stuck most often?
Most often, the most used buttons on a washing mashine get stuck. This:
- power key;
- mode selector;
- spin button;
- individual options that are used most often;
- door opening lever.
How to fix a breakdown
If the keys on your machine stick, you will need to disassemble the device to fix the problem. Necessary:
- remove the top cover of the product;
- Unscrew the fasteners and disconnect the control panel;
- remove the electronic unit.
Next you need to inspect the state of the buttons. As a rule, you can already determine by their appearance why they began to sink. Faulty elements may have traces of dirt or detergent; in addition, broken wiring or burnt contacts may be found.
If the keys stick due to accumulated dirt, the user will need an old toothbrush or a hard sponge. They must be dry so as not to wet the contacts and cause a short circuit when turned on. It is necessary to thoroughly clean not only the buttons themselves, but also the seats from accumulations of debris. After the parts are clean, you need to reassemble the washing machine in reverse order.
If the owner of the equipment discovers burnt out contacts, the breakdown can be eliminated by replacing the faulty part with a new one. You can find it at your nearest service center or specialty store. The key can also be ordered online. To avoid making a mistake when purchasing, you need to take the faulty part with you or tell the seller the model and make of the washing mashine.
If the user sees broken wiring, it is necessary to restore the damaged chain links.
Is it possible to use a washing machine with stuck keys?
Operating the washing machine with sunken buttons is possible only if the non-working key is used very rarely. So, if the “Start” button is stuck, the user simply will not be able to start the washing machine. The keys for changing the temperature or speed during the spin cycle will not allow you to wash certain types of fabrics. The same goes for stuck program buttons. If Keys for selecting individual options do not work, the user will not be able to use them.
Risks when operating broken equipment
It is not recommended to ignore malfunctions and operate a washing machine with stuck keys. This can lead to various unpleasant consequences, including a fire due to faulty wiring or burnt out contacts.
At the same time, you shouldn’t repair equipment yourself if you don’t have confidence in your own abilities. Incorrect actions can lead to machine failure (for example, very easy damage to the electronic board) and costly repairs.
Conclusion
When using a washing machine, users often encounter problems with its buttons getting stuck. This problem is typical for equipment from different manufacturers; it is very easy to fix if you know what to do in such a situation. To fix stuck keys, you need to disassemble the equipment and get to the buttons, inspect them, identify the problem and fix it. All actions must be performed carefully so as not to cause further damage to the device.
