Error F01 in the Indesit washing machine - how to fix it

This error does not appear on the display very often. Most often it occurs on older washing mashine models in which the display occurred in a different way. Error F01 on an Indesit washing machine refers to a situation where the washing machine motor is faulty. Such problems usually arise in washing machines that have been in use for a long time.

The electric motor is the main part of the washing machine. This unit is reliable and durable. Such failures are mostly associated with wear and tear of equipment.

How is the indication carried out?

If the Indesit machine is equipped with a special display, information will appear on it that error F01 has occurred. On washing machines of older models, error F01 can be expressed in the form of an additional rinse light on or a flashing “Spin” or “Lock” light.

Possible causes of error F01

When it comes to engine failure, this can be caused by various reasons:

1. Sometimes when you turn on the Indesit washing machine, the drum does not spin. This situation indicates that the fault must be looked for in the motor.
2. In some cases, error F01 occurs due to power problems. Sometimes this is caused by a faulty cord or plug.
3. If it turns on, the drum rotates, but a strange crackling noise is heard, then the Indesit machine must be turned off immediately.The likely cause in this case is wear on the motor carbon brushes.
4. It is possible that the reason that error F01 appeared on the screen of the Indesit machine is damage to the winding. This is often caused by a break in the wire used there.
5. Since the operation of the Indesit washing machine creates an environment highly saturated with moisture, the presence of corrosion is quite likely. If the contacts of the engine pads are exposed to it, the contact is broken, which leads to disruption of the engine.
6. Sometimes problems arise due to a malfunction in the triac.

How to start repairs

When error F01 appears, first of all you need to check whether the electrical outlets are working. Once you are sure that everything is in order with the network, you can proceed to further steps.

It should be noted that a failure and the occurrence of error F01 does not necessarily indicate a malfunction. In some cases, there may be a coincidence. In order to check this, you need to turn off the washing machine, unplug the cord from the outlet, wait about twenty minutes and turn on the Indesit machine again. There is a chance that everything will work fine.

Let's assume that the breakdown that caused error F01 could not be corrected by simple means.

We'll tell you how to fix error F01 in this case:

1. You need to carefully inspect the socket and cord of the Indesit washing machine.
2. Next, proceed to a direct inspection of the washing equipment engine.
3. First, open the service hatch. The electric motor of the Indesit washing equipment is disconnected using an 8 mm wrench.
4. Next, to correct error F01, you need to remove the engine and inspect its brushes. To do this, unscrew it using a screwdriver. Then you need to inspect for possible damage or wear.If problems are found, it is recommended to replace these parts.
5. After replacement, everything is installed back.

The Indesit machine is then turned on to check how it works. Sometimes a clearly audible cracking sound is heard, what does it mean, no cause for concern. This noise is due to the grinding of the brushes.

If the problem that caused error F01 to appear is not related to the operation of the brushes, the inspection of the Indesit machine engine must be continued:

1. Now you need to pay attention to the control module. When examining the board, you need to determine whether there are traces of corrosion. If they are found, they will need to be carefully cleaned.
2. Now the motor winding is inspected. If it burns out, then the motor cannot be repaired - it will have to be replaced. This is a fairly expensive operation. If it is not financially feasible to do this, it is more profitable to buy a new, more modern washing mashine model.
3. One of the possible causes of error F01 is a malfunction of the control module. If all other reasons are excluded, you will need to pay attention to this node. You cannot repair it yourself. This should be done by specialists who use the appropriate equipment.

One of the possible failures is when the drum suddenly stops during operation. In this case, the washer indicates error code F01.

In this case, it is recommended to take the following actions:

1. When error F01 appears, the first thing you need to do is turn off the Indesit machine.
2. Now you need to carefully drain the water from the tank of the Indesit washing machine.
3. After there is no water left, you must try to rotate it by hand.
4. If it moves normally, the reason for the F01 error may be too much laundry to wash.Now you need to divide the amount in half and try to wash half the original amount.
5. If these attempts are unsuccessful, you need to inspect the engine of the Indesit machine.
6. Perhaps error F01 appeared because the motor pulley was torn. Over time it can become worn and weakened. In addition, it may not have been damaged, but simply slipped. In the latter case, it is enough to simply install it carefully in place.
7. If the electronic control board is faulty, the motor of the Indesit device may simply not receive a start signal. In some cases, you can do the fix yourself. To do this, it makes sense to try resetting the programs. If this does not help, then you will have to contact a workshop with such a malfunction.
8. If the brushes are worn or damaged, they will need to be replaced.
9. Voltage surges can lead to breakdown of the Indesit machine's electric motor and the appearance of error F01. What to do in this case? You will not be able to carry out repairs yourself. Only a specialist can fix this problem.

Conclusion

Error F01 on an Indesit washing machine indicates a motor failure. Malfunctions associated with the engine of an Indesit machine require the most careful attention. In many cases, it may be necessary to make expensive repairs if the damage is serious. And repairs are expensive, sometimes it makes sense to buy a new washing machine.