Almost every modern family has such a household appliance as a washing machine. But, unfortunately, even the highest quality products sometimes break down. But the situation when the Ariston washing machine does not turn on can undoubtedly be called a serious problem. However, you should not immediately call a home appliance repairman, because in some cases you can fix the malfunction yourself. But first of all, you need to figure out what the cause of the breakdown is.
How washing machines work
First, it is recommended to figure out how any washing machine works . Water is supplied through a filter and a valve into the unit. The outlet valve controls the hatch lock, which is triggered when the laundry is loaded and the contact on the hatch is activated. The water level relay regulates its supply to the drum.
Then the water is heated and the motor rotates. All stages of washing are activated according to the specified time in one mode or another. Water is drained from the system through the drain pump.
Having figured out the step-by-step operation of the washing machine, you can pay attention to the various reasons for its improper operation. Everything starts, as a rule, with the simplest checks:
- Is the power cord plugged into the network.
- Is there electricity in the outlet.Checking this is quite simple: just plug in another electrical device, such as a night light, into the outlet.
- The cord and plug are checked. To do this you need to inspect them. They must be undamaged and have no burning or melting smell. Sometimes this is one of the reasons why the Ariston machine does not turn on.
Causes of breakdowns
The test begins with determining the device's response to assignments of his work program. If, when you press the start button, the Ariston machine does not respond and the indicators do not light up, then we can safely say that some element of the machine has failed.
In addition, the cold water supply filter from the system may become clogged. In this case, the chamber does not fill with water and the machine is blocked. You need to unscrew the adapter on the machine through which water flows, clean the filter mesh, put everything back in place and try to start the unit again.
There are situations when the indicator blinks and the Ariston machine does not turn on. Also, sometimes the hatch door for storing laundry is not locked. The reason for this is damage to the locking device. If so, then it needs to be replaced. It is recommended to trust such repairs to professionals.
Sometimes situations may occur when Spin does not turn on. There is a high probability that the controller is faulty. Measures aimed at checking it are as follows:
- The block is removed and opened. It is closed with two side latches.They are easy to open with a screwdriver.
- Then the board is inspected to see if there are burnt elements or swollen electrolytic capacitors on it. If there are any, they need to be replaced. The replacement process is carried out using a soldering iron. It must have a power of no more than 40 W. You need to desolder the elements very carefully, as the connecting tracks may come off due to the high temperature. Solder with rosin is used for desoldering and soldering. Before unsoldering, it is necessary to determine the polarity of the capacitors. This is usually written on their body.
- If the installed unit still does not work, then the best option is to contact a specialized workshop or service center.
In addition, the Ariston washing machine may not turn on if the internal wiring is damaged. However, there are malfunctions that are quite problematic to identify. For example, the cause of a breakdown may be reduced insulation in relation to the body of the device, motor and heating elements.
Frequent breakdowns
The most common breakdowns include, first of all, hatch lock failure for linen. Without this function, the Ariston washing machine will not turn on. To check the operation of the hatch lock, you must perform the following steps:
- Simulate closing the lock. To do this, use a screwdriver when the door is open to press the lock contact. If the automation does not respond and there is a signal that the hatch is not closed, then disconnect the machine from the network and unscrew the lock. To do this, use a screwdriver to pull out the spring under the rubber of the hatch seal.
- We unscrew the lock on the inside panel of the hatch, which is secured with two bolts. There is a button on the lock. After turning on the washing mashine, use a screwdriver to simulate closing the hatch. If this does not happen, then take the device and measure the voltage at the input and output of the lock. If there is voltage at the input, but not at the output, then the lock must be replaced.
The second most popular reason is a malfunction of the heating element. This breakdown prevents the machine from moving to the next mode. The controller heats the water and the washing process can last indefinitely.
Prevention and care of the machine
It should be noted that if not take care of your washing machine, then it will not only not last long, but will also emit a rather unpleasant odor. To prevent this situation, a number of actions must be taken. For this you will need:
- household gloves;
- sponge;
- basin;
- old toothbrush;
- cloth for wiping;
- disinfectant solution;
- glass cleaner.
Prevention involves washing the drain pump filter. Using a toothbrush and a disinfectant composition, the filter is treated with this solution. Its location is also disinfected. Then everything is washed with running water. After the filter is wiped dry, it is installed in place.
To clean the rubber gasket of the drum seal, it should be disinfected with a solution. However, it is not advisable to leave the gum with the solution for a long time. Then the hatch door is wiped. To do this, use glass cleaner. After wiping, the door is not closed completely to ensure ventilation and complete drying of the drum. External elements are wiped with a soap solution and soda.
The heating element is cleaned every six months using citric acid. To do this, you need to pour 100 grams of acid into the powder compartment. The Ariston machine is switched on for the longest mode and the highest heating temperature is set. All these actions are also performed with machines with vertical loading.
In the end, it should be said that there are quite a lot of reasons why the Ariston Hotpoint washing machine does not turn on. Some of them can be eliminated with your own hands, but in certain situations it is still recommended to seek help from specialists at a service center. Undoubtedly, behind the washing machine, as well as Any household appliance should be looked after and carry out timely preventive measures. Then it will be able to last for a very long time.
