What to do if your Bosch washing machine stops spinning clothes

Users of Bosch washing machines often encounter a situation where the machine does not spin clothes. What to do in such a situation? Let's try to solve this problem.

Malfunctions due to user errors

Spinning clothes in a Bosch washing machine, as a rule, does not occur in cases where the owner makes a mistake in the process of selecting a program or violates the rules for using the equipment.

It should be noted that delicate washing modes either do not contain spinning at all, or they are performed at minimum speed.

Also, the user may inadvertently set the spin speed of the washing equipment incorrectly or turn it off completely.

In this case there is no problem. You must wait until the washing program has completed, and then spin the laundry separately. On Bosch machines this function is indicated by a spiral icon.

You need to be very careful when sorting dirty laundry. After all, dirty things need to be sorted by quantity, color and weight.

For example, small items need to be complemented by some large item.

Troubleshooting

A malfunction may be the reason why the Bosch machine has stopped spinning clothes.

Failure to spin laundry can cause the following parts to malfunction:

• tachometer;
• engine;
• the filter or pump is clogged;
• water level sensor;
• control module malfunction.

A clogged pump or drain filter can also cause the washer to stop spinning clothes.

When the belt is stretched, the tachometer transmits information to the control module about speed data that does not correspond to those stored in the base. As a result, a failure occurs in the control module and the program stops immediately before spinning the laundry.

This problem occurs not only with Bosch washing machines. With Ardo washing equipment, laundry may not be spun for the same reasons.

If this malfunction is detected, the drive belt must be replaced. After this, the control module and the machine itself will work properly.

Troubleshooting

When Bosch washing equipment stops spinning clothes or does not start the spin phase at all, the first thing you need to do is unscrew and inspect the garbage filter.

If you have an automatic washing machine, this procedure must be performed. Otherwise, problems may arise related to draining dirty water, as well as starting the spin function.

Then you need to disconnect the washing equipment from the communications and take it out to a place where it can be disassembled without any problems.

Next, you need to pull out the detergent tray and place the device on the left side. To get to the pump and drain pipe, you need to remove the pan.

At the next stage, you need to unscrew the clamps, pull off the pipe and carefully inspect it. Next, the pump is dismantled. It needs to be disassembled and inspected. Particular attention should be paid to the impeller. Using a multimeter, we check the resistance of the pump.

If it is ok, you should immediately check the electric motor. After all, it’s more convenient to get to it through the bottom of the machine. We remove and check the brushes. If they are working properly, it is necessary to measure the resistance of the motor winding.

Then you need to check the tachometer of your Bosch washing equipment. This part is located directly on the unit’s electric motor housing. You can get to the tachometer through the bottom of the machine. You need to remove it and then check the resistance with a multimeter. The faulty sensor must be replaced with a new one.

Next comes checking the pressure switch.

To do this you need:

1. Unscrew the fasteners securing the top cover of the washing machine;
2. Remove the top cover.
3. Remove the pressure switch.
4. Clean the water level sensor tube thoroughly and then blow it out. Measure the resistance. If the pressure switch is faulty, replace it with a new one.
5. If the fault cannot be identified, you need to check the control module of the machine.

To diagnose and repair this part, you need to have extensive experience working with electronics. It will be extremely difficult for an ordinary user to repair the control module. In this case, it is better to seek help from a specialist.

Preventive measures

Washing machines, like any household appliance, sometimes break down. But with proper care and operation, the machine will last longer than usual without malfunctions.

To make the device last longer, you must follow certain rules that many washing machine owners ignore:

1. Before loading things into the drum of the machine, you must carefully check all the pockets. If you do not do this, small objects may get into the tank of the machine. And this can cause a blockage or malfunction.
2. Do not overload the washing machine. However, you should not run it idle either. Load an average number of things into the drum of the machine. If you follow this rule, the drive mechanism and electric motor will last longer.
3. Use the Bosch washing machine at least once a month. Long-term idle time will lead to the fact that its rubber bands will fail.
4. Do not pour an excessive amount of washing powder into the detergent drawer. Excess powder will clog the pressure switch tube and pipes. And this will cause a malfunction.
5. If possible, you need to purchase a voltage stabilizer and connect the machine to the power grid through it. This way you can protect the electronics of the washing machine from possible breakdowns.
6. After each wash, you need to wipe the hatch cuff with a cloth. The same should be done with the powder receptacle. The hatch should be left open. The detergent drawer must be pulled out. You should also drain the remaining water so that it does not stagnate.