Every owner of a Bosch washing machine has had to deal with technical malfunctions of various types. Further in the article we will talk about what to do if the Bosch washing machine does not drain the water. And what causes the breakdown.
Why doesn't the water drain?
Pin case of breakdown Bosch washing equipment, most often they call a repairman. But in some cases, the malfunction of important equipment must be resolved immediately. Certain types of technical problems can be corrected independently, even without special skills. A common type of breakdown is the lack of drainage and spinning. Bosch Maxx 4 models exhibit the following symptoms:
- When the water drains, the washing stops. The water remains in the drum.
- Slow flow of water from the tank, which causes disruption of the mechanism system.
- If there is no water in the drum, spinning is not performed.
- The water leaves during the washing process and remains in the tank after rinsing.
- Draining occurs only in certain washing modes.
- The machine hums when the work process is completed, the water is not drained.
Owners of Bosch washing equipment should know what to do if the drain and spin system are broken. If Bosch washing machine stopped draining water and spinning clothes, you need to check the settings and the set washing mode.Some modes require no spin and are intended for delicate fabrics.
To do this, disconnect the hose and hang it over the sink or bathtub. By turning on one of the washing modes, observe the flow of water. If the pressure is free, then the sewer system is clogged. To clean it, you need to call a plumber.
Clogged filter
When loading dirty clothes into the washing machine drum, housewives often forget to check the contents of their pockets. Therefore, the filter may contain the following items: coins, paper, lint, small toys and other things. In Bosch washing machines, water enters the drain hose through a filter, and not directly from the pump.
This serves as protection against clogging of sewer pipes and keeps things forgotten in your pockets. A clogged filter is one of the reasons why the machine does not drain water or spin. In this case, the automation displays an error code indicating a problem has occurred.
On Bosch models, access to the filter is located at the bottom of the front panel.It is important to remember that when opening the panel, you should cover the floor with rags, because there may be a flow of water remaining in the pump. If this does not happen, then the pipe that connects the tank and the pump is clogged. This cleaning is carried out by a master. Carefully After removing the filter from the washing machine, you need to clean it of dirt, rinse and return to place using the steps indicated in the instructions. Preventative cleaning of this kind must be carried out systematically.
Pump malfunction
Another reason why a Bosch washing machine does not drain water is a pump failure. In this case, the washing machine does not drain water and hums. During proper draining, a specific, muffled hum is heard. The pump malfunction is repaired by a technician. A breakdown may occur due to an old pump that has worn out over a long period of time.
Also, small debris that has penetrated the filter can cause the pump to malfunction. Hair, threads or wool could be wound around the pump, so it will not be possible to do without a detailed analysis of the mechanism. If your Bosch washing machine hums while draining water, or there are periodic interruptions in water draining and spinning, these are sure signs that the pump needs to be replaced.
Module and wiring fault
The reason for the lack of water spin in a Bosch washing machine may be faulty wiring inside the mechanism. A home appliance repair technician will be able to identify this problem. Also, burnt microcircuits and interruptions in the unit’s firmware are a possible reason for the lack of water drainage. In each situation, the technician determines whether the module can be repaired or whether the programmer needs to be completely replaced with a new one.
Wrong program selected
IN Bosch Maxx 5 models There is a “no drain” washing mode designed for delicate fabrics. An incorrectly selected mode can cause non-standard behavior of the mechanism. Therefore, before calling a technician and opening the unit, you need to make sure that the washing mode is correctly selected.
Checking the machine after repair
After this, the Bosch machine needs to be started and the washing process cycled through in all modes. If the mechanisms are in good working order, you should disconnect the unit from the network, tilt it back and check the integrity and tightness of the connections, and eliminate the presence of leaks. If some connections have a leak, then you need to fix it by carefully inspecting all the parts and the pump. After checking, the washing machine is ready for further use.
To prevent breakdowns of the drain system in Bosch models classic 5, you need to check the clothes before loading them into the drum. Small parts and objects can clog the filter and pump, causing the spinning and draining process to stop.
In case of serious damage, you should contact a repairman or service center. Troubleshooting yourself in some cases can lead to more serious damage. Timely prevention and careful handling will extend the life of your Bosch washing machine.
