The washing machine does not pick up the air conditioner - what to do?

The device for washing clothes reported that the work process was completed, everything went as expected, but clean laundry does not smell fresh, but emits odors detergent. Pulling out the dispenser compartment reveals unused rinse aid in the tray. It seems there is no reason to worry, but there are still certain difficulties, because even minimal deviations from the process become significant preconditions for breakdowns. We will have to figure out why the washing machine does not remove the air conditioner from the compartment.

Possible causes of malfunction

It is not recommended to be negligent in such situations. Initially, the simplest problem that does not interfere with the operation of the washing machine tells you that a serious failure has occurred in the automation, which after some time will result in big troubles. In this case, experts recommend checking all possible sources of the problem, from mild to the most complex faults. First, let's look at the easiest reasons that can be eliminated on our own:

the pressure of the incoming water has weakened. Often the air conditioner does not leave the machine tray because the water is supplied at low pressure. In this case, at the initial stage of washing, it takes a long time to fill with water, and strange rustling noises are heard.Perhaps the supply valve is only half open, or the pressure in the central water supply system has weakened;
error when selecting tray compartment. The air conditioner is poured into a special compartment that has the appropriate mark. A common mistake made is to pour the liquid product into the powder tray, which is activated during the prewash. You need to find the instructions for the washing machine and clarify the tray designations;
The dispenser is clogged. The remaining conditioner could dry out or stick together, partially or completely blocking the flush channel. The problem can be solved - cleaning is carried out regularly. The procedure produces results when performed once every couple of months;
a product is used, the amount of which exceeds the norm. Modern washing machines can independently determine the amount of conditioner required, and the product remaining in the tray will indicate that it is excess;
poor quality air conditioner. It is necessary not only choose a good remedy, but also to clarify its expiration date. The composition may not only be dangerous, but also have a viscous consistency. The thick and sticky product poured into the tray is difficult to absorb with water.

What to do if the pressure in the water supply system is normal, the product is poured in the required quantity and meets the required quality, the tray has just been cleaned, but there is still conditioner in it? We'll have to continue searching for the problem. It is possible that the water intake valve has failed.

Clarifying problem signs

If the above contingencies are completely excluded, there are three steps left to take:

clean the intake filter;
repair this element;
replace with a working analogue.

To choose the appropriate option, you should clarify certain characteristics:

The washing powder and conditioner are not completely washed out with water, the work cycle is activated, and the machine takes a long time to fill the tank with water. The cause must be sought in a clogged inlet filter;
the air conditioner remains untouched, the washing machine is unable to absorb the required amount of water into the system, sends a code corresponding to the error to the panel screen and does not start the washing process. The reason lies in severe blockage of the valve or its complete failure;
The detergent remains unused, water is quickly poured into the machine, and the washing device begins to work. The difficulty lies in the fact that the mechanism that directs the flow of water into the tray has failed. The air conditioner is washed out using a special nozzle that rotates through a cable and spring. A failed mechanism will direct a stream of water to another tray.

Each listed malfunction requires immediate action.

How to fix the situation

In most cases, the problem is due to a clogged intake valve filter. To eliminate it, you must clean the element. The algorithm of actions does not cause any difficulties and is performed in the following order:

the washing machine is disconnected from the water supply and electrical network;
the water intake hose is disconnected from its body part;
a filter mesh made of plastic material is removed;
the filter element is washed under water pressure. If there is a lot of scale, you can soak it in citric acid (a spoonful in a glass of warm water).

When the filter mesh becomes clean, it is returned to its original place and the filler sleeve is screwed on.After completing all the steps, make sure that there are no drops of water at the joints, connect the machine to the water pipe and electricity, set any mode and check whether water flows into the air conditioner tray.

Changing the valve

This is necessary if the element has completely lost its ability to work. The event is troublesome, but quite doable on your own. First, you should purchase a new analogue, specifying the serial number of the washing unit, after which you can proceed to replacement. Actions are performed in the following sequence:

the machine is disconnected from the power supply, the water supply is cut off;
Unscrew the fastening screws of the top cover and remove it to find the valve. If your washing mashine has vertical loading option, you will have to additionally remove the side panel located closer to the connection point of the water intake hose;
The wiring is disconnected from the part and the pipe is disconnected. For this purpose, the fastening clamps are loosened. If the rings are disposable. They are simply cut off and replaced with new ones during installation;
the valve is disconnected from the body part. To do this, release the latch or unscrew the screws;
Carefully remove the part by turning it slightly in the direction of the clock hand.

If the need arises, you can check the condition of the nozzle cable and the water supply device itself, carry out repair work, or immediately install a new analogue. In each case, all installation work is carried out in the reverse order - the valve is inserted into the groove with a slight twist, the pipe and wiring are connected, the clamps are tightened, and the panel is installed in its place. All that remains is to check the operation of the washing machine in any mode.

Conclusion

It is quite easy to determine that your washing machine does not use the conditioner from the corresponding tray during operation - clean items will not have pleasant smells, and the product will remain untouched. This situation entails not only the absence of aromatic odors, but also significant problems, which include a complete failure of the washing machine. Before determining the cause of the malfunction and calling an experienced specialist, you can try to clarify the extent of the malfunction yourself.

Note that the repair is quite do-it-yourself, significant cash costs will not be required. But you should not leave everything without due attention. The fact is that a faulty inlet valve can work for some time until it finally fails. In this case, water will not flow into the washing machine, and washing will have to be done manually or postponed for an indefinite period. And if your device has given the first alarm signals - pay attention to them immediately and take appropriate measures.