Error F01, F1 in the Ariston washing machine

Every model from this company has a similar error. As a rule, deciphering it is not difficult, but in a certain situation it is sometimes difficult to identify the malfunction that caused it. Let's try to figure out what error F01 means on an Ariston washing machine.

Code options

At the initial stage, it is necessary to understand what options the error code F01 represents. Here you can’t expect tricky surprises from the manufacturer of the unit. If the washing unit has a screen, then up to eighty-five percent of the products at the time of a characteristic malfunction will generate an F01 signal, and the rest will display an F1 error code.

If the SM does not have a display, then recognizing error F01 is more difficult. But if you have the necessary knowledge, you can cope with this problem. Let's look at the available options:

On Ariston AQSL machines, error F01 will be indicated by the blinking temperature indicator located at the bottom of the panel.
Low-End will display an error by flashing the key light or lighting up horizontally located lights.
Ariston units from the AVSL product line will display error F01 by flashing the indicator light for the “extra rinse” function while the indicator light is on, indicating the door is blocked.
Outdated Margherita models signal a problem by constantly lighting the “Key” lamp and periodically blinking the “on” indicator light.

What does this error code mean?

The F01 error options are clear, all that remains is to learn how to decipher them. This code indicates that there has been a malfunction in the electrical circuit responsible for the operation of the Ariston car’s motor. Such a dry formulation does not explain anything to the average user. But if we talk about error F01 in more detail, it should be noted that the control module sending signals to the engine does not receive anything in response. It turns out that there are three possible options:

the control board has failed and is issuing incorrect commands;
the motor broke down, losing the ability to obey the board’s commands;
the problem has occurred in the circuit connecting the motor and the control module, and you need to look for it in the wiring or contact group.

Initially, this decoding of error F01 may seem somewhat scary. There is a feeling that the malfunction is serious. But in reality, everything is much simpler, since such a failure often occurs due to a normal failure of the electronic module.

It is already known that in almost all Ariston machines the error code F01 is explained in the same way. But every rule has exceptions. And the Ariston machine from the AD series is slightly different in the principle of self-diagnosis - in it, error F01 indicates an interruption of communication from the modular zone to the control panel display. Simply put, such a problem means that the management module has lost the ability to contact the panel responsible for control, and it has begun to show “inadequacy”.

The main causes of the error

Let's look at the more common options for error F01:

moisture has entered the connecting contacts of the motor and controller;
a short circuit occurred in the electrical circuit connecting the engine and the block of the Ariston machine;
corrosion has formed on the motor contact;
the problem lies in the connecting harness from the motor to the controller.

Sometimes error F01 appears periodically and signals that urgent repairs to the Ariston unit are required.

What to do in such cases?

Let's consider the labor-intensive process of finding and eliminating the reasons why error code F01 was displayed. Experienced specialists advise starting the search for possible problems with simpler ones, moving towards more complex issues that involve disassembling the Ariston machine.

When code F01 appears on the screen, the control module of the Ariston machine is first checked for the origin of a local failure. Everything happens simply:

de-energize the machine from the electrical network;
wait from five to seven minutes;
We turn on the Ariston unit and try to activate the washing program.

If this method does not give positive results, we repeat the reboot attempt several more times. Sometimes such a failure is eliminated after two or three restarts.

One of the indirect reasons for such a failure and the appearance of error F01 is excessively low voltage in the network. This happens in small towns. Ariston does not always respond to this problem with error code F01, but it is necessary to check because a problem with the electrical supply can lead to quite serious failures. If this happens often, it is recommended to buy a device for stabilizing the voltage and connect the Ariston washing machine to the network through it.

Now you need to use a multimeter and check the socket and cord for integrity.

The chances of getting results are slim, but sometimes the problem lies here. When all the easy reasons are over, you will have to look inside your Ariston washing machine. To do this, perform the following steps:

we install the Ariston washing unit in a room with sufficient free space so that nothing interferes with the repair work;
remove the tray for washing powders and put it aside;
unscrew the screws holding the back panel of the machine;
remove the drive belt;
We photograph the wires on the engine of the Ariston washing mashine, disconnect them;
Unscrew the motor mounts and remove the engine.

First we inspect the brushes, then the winding. Make sure that there is no leakage to the body part. For this:

on the sides of the Ariston washing machine motor we look for small screws that secure the brushes and unscrew them;
remove the brushes, check for wear, and replace if necessary;
We set the multimeter probes in turns, systematically checking them in search of a breakdown;
If everything is normal, we move on from the winding to checking the housing part.

If a breakdown is detected in the winding or a leak to the housing, you can throw away the motor without any doubt. Repairs in such cases are expensive and not worth it.

If the engine is working, use a multimeter to check all the wires that power it. Each element is checked repeatedly to eliminate the F01 error and not repeat such work.

Now it's the turn of the control board for the Ariston washing machine. According to the old tradition, one should not go into such details. Without the appropriate experience, you can only cause additional harm by increasing the cost of repairs. It is best to entrust this type of work to an experienced service center professional.

If you have tried all the testing methods, but the Ariston washing machine still refuses to work and displays error F01, you can confidently state a breakdown. Only a specialist knows how to fix it.

Solve the problems yourself

Here are some tips that can help you avoid unnecessary financial costs:

The appearance of error F01 can be caused by high humidity in the room where your Ariston machine is located. It is recommended to ventilate more often.
Only an electrician can fix problems with the voltage in the network, otherwise you will have to spend money on a stabilizer.
If error F01 occurred due to the power cord with the socket, replace these elements. Do not use extension cords, so as not to aggravate the situation.
Check the contacts, remove traces of corrosion and moisture from them. Perhaps the block in the motor has come off.
Periodically, you should check the connections of the wiring leading from the motor to the control board of the Ariston machine. Conclusion

To our great disappointment, many users do not pay attention to the rule - "if the first signs appear, contact a specialist." At first, everyone hopes that it will pass, then extraneous noise appears in the motor, the bearing starts to leak, and moisture penetrates the motor. Ultimately, the Ariston machine stops rotating the drum.

It is worth adding that you should not panic from the error code F01. Problems can be hidden in such places that they can be easily fixed on your own.

similar entries from this section