Samsung washing machine does not spin or drain water - reasons

Samsung washing machine is a household appliance that simplifies family tasks, so you can count on convenience when putting things in order. When developing its equipment, Samsung Corporation uses only high-quality materials, which guarantees high reliability, practicality, convenience and functionality during operation. But what to do if the Samsung washing machine does not spin or drain water? This is a common breakdown that requires prompt intervention to eliminate the malfunction and restore normal operation.

Possible reasons

If a Samsung washing machine does not drain, what reasons can be identified? The question is relevant among those people who actively use this type of household appliances, and therefore try to extend their service life without compromising their functional qualities.

Experts identify the following main reasons when a Samsung washing machine does not spin or drain water:

Blockage. If the drain hose from the pump becomes clogged with debris, then the water drainage system is blocked, which is why the machine cannot wring out things and remove excess moisture.As a rule, such a malfunction appears if the hoses and pump are not cleaned in a timely manner, since these are the parts in the design of the washing machine that are considered the most vulnerable and require careful attention.
Mechanical or electronic pump system. If the pump fails, the washing machine freezes, causing the water to not drain.
Pressostat. This is a level sensor that controls the amount of waste water in the system, so if it fails, the normal functioning of the Samsung washing machine is disrupted. In this regard, in addition to the pump need to check that too.
Control module. This is the most serious and costly breakdown, since it requires restoration of all the electrical equipment in a Samsung washing machine, and this is a large expense that not everyone can afford. In most cases, it will be cheaper to replace the washing machine with a new one than to eliminate all the breakdowns caused by non-functioning electronics. Therefore, the drain mechanism is only an additional malfunction against the background of a general breakdown.

Important! Before interfering with the technical devices of the washing machine, it is recommended to restart it, since most often the breakdown is solved in this way. Then the drain mechanism begins to work properly without additional difficulties.

Subtleties of finding the location of the breakdown

You can find faults in different ways, but the most important thing, which experts recommend, is to exclude consumer errors, since in most cases they are considered the main reason for the malfunction of the Samsung washing machine, namely the lack of a drain function.

Among the main errors of this nature are:

The machine freezes during operation due to the overload of the drum, so it cannot cope with the mechanical loads exerted.
There is no spin because it is turned off on the instrument panel, since often inexperience in using the machine can result in such inconvenience.
A short-term electronic failure can also cause the water drain function to fail. As a rule, the error is eliminated by simply restarting and turning on in a stopped operating mode.

Important! When determining the cause of a malfunction, it is better to pay attention to simple breakdowns, gradually moving on to complex ones.

Only after eliminating consumer errors can you begin to identify other, more technical and serious ones:

First, attention is paid to the Samsung washing machine system for blockages. The drain hose and pump are checked, since debris often accumulates in it, and then it is important to inspect all connecting elements leading to the drain tank, since there is a high probability of clogging of the holes due to trapped debris.
If no blockages are found in the drain system, then the pump is checked, and here it is important to examine the mechanical and electrical parts.
If pump failure is ruled out, it is time to diagnose the pressure switch. To do this, you need to dismantle it and check it with a multimeter, which allows you to determine whether it is functioning correctly.
If no errors were found in the pressure switch, then all that remains is to inspect the wiring of the washing machine, since it may short-circuit or break on the way to the control module, which is why it operates in emergency mode and cannot cope with the specified commands.But before you start work, you need to familiarize yourself with the rules for “ringing” the wiring so as not to run into dangers.

It is not always possible to perform all such manipulations quickly and efficiently without the involvement of specialists, since Samsung is a complex household device, so it is important to pay attention to even small details. In this case, the drain system will be restored and additional maintenance of the device will be carried out.

Brief description of each error

To understand what to do if your Samsung washing machine begins to malfunction, that is, there is no function of spinning and removing water from the structure, it is important to consider each error in detail. There are many reasons, but experts in the field of washing equipment repair highlight several key ones.

Sewerage

To check if this is the problem, you need to unscrew and remove the drain hose and direct it into the bathtub, then start the spin or drain mode. If the water is removed freely, then the cause of the breakdown is not in the Samsung washing machine, but in the sewer. The problem is corrected by cleaning the sewer system at the exit point.

Drain hose

A clogged drain hose is the most common problem, as the cause of the malfunction can be a coin, a clump of hair, or a small object like a button that accidentally gets into the system. This is very difficult to determine, so it is important check the entire system, using steps like:

The Samsung washing machine needs to be placed on its side.
The motor is covered with a plastic bag to prevent moisture from entering.
The drain hose is disconnected from the pump and carefully pulled out of the machine so as not to touch other parts.
The hose is washed and cleaned to remove the blockage.
Installed in place.
All work is performed in reverse order to restore the device to functionality.

Important! Washing machines use a corrugated hose to drain, so sometimes sequential compression and expansion of it is enough to soften and remove the dirt plug.

Air lock in the pump

This problem is extremely rare, but you need to know that it has a right to exist. When air gets into the pump, the Samsung machine begins to hum loudly, without draining the water after spinning.

You can fix the problem by pulling the drain hose into the bathroom, after which the drain mode is started to eliminate all the liquid and air that has collected inside the system.

Pump clogged

To fix this problem You need to unscrew the cap and remove the concentrator, cleaning it thoroughly. It also removes blockages on the impeller, which is responsible for the normal functioning of the pump.

To avoid such a problem, it is recommended to collect small parts in special bags when washing so that they do not fall into important structural components of the Samsung washing machine.

Control board burnout

The module is the heart and brain of a Samsung washing machine, so if the contacts burn out, the only solution is to replace the part with a new one.

Pump failure

The pump is a small electric motor that can fail due to constant blockages, so it is recommended to clean it in a timely manner to eliminate more general breakdowns. But, as practice shows, under certain conditions the unit can be repaired using the services of professionals.

In the end, it should be said that a Samsung washing machine is a special household device that consists of different systems and components, so only timely maintenance and compliance with operating rules will avoid a lot of problems in the future. It is also important to remember that minor timely repairs prevent any serious problems from occurring.