How to properly remove the top cover from a Whirlpool washing machine?

Occasionally washing machines break down, and the reasons may be different. It is important to figure out what exactly led to the breakdown. Diagnostics often require dismantling the top part. You will need to know how to remove the cover correctly so as not to break anything. You will have to follow the instructions to carry out the procedure correctly. Removing the top cover of the Whirlpool washing machine is not difficult, but you will need to take into account some features.

Which washing machines can remove the top cover?

Now the top part of the Whirlpool washing machine can be removed from almost all units. It does not matter whether the device is vertical or front loading. The algorithm of actions is universal for any type. You will have to first unscrew the mounting bolts and then disconnect the top.

Before proceeding, it is recommended read detailed instructions. In this case, you will be able to do everything correctly and avoid negative consequences.

The top panel of the Whirlpool needs to be removed in different cases. First of all, in order to get to the filling valve. Perhaps there is underfilling or overfilling. In addition, the procedure is carried out when the powder is poorly washed off. You will have to make sure that water is supplied normally to the powder receptacle.

Regardless of the situation, it is important to be well prepared for the procedure and follow the instructions. In this case, you will be able to cope with the task at home.

Preparing to remove the cover

You need to prepare first Whirlpool washing machineso that later you can easily remove the top panel. You will have to disconnect the unit from the electrical network and other communications. This is a mandatory condition, because you cannot work with the machine turned on.

You will need to move the device away from the wall or out of the closet. To be able to easily remove the top panel, you will need room to maneuver.

It is recommended to wear rubber gloves. They are needed to protect yourself during manipulations. The fact is that some parts of the Whirlpool machine are capable of retaining an electrical charge. Therefore, you should not climb into the machine with unprotected hands. It is worth taking precautions so as not to risk your health.

You need to look at exactly where the mounting screws are located. In most cases they are located at the back. A little less often, the screws are located in the front, and this is especially true for older models.

It is imperative to choose a screwdriver that will be suitable for a particular situation. You can also choose a screwdriver attachment to quickly unscrew the bolts.

It is imperative to pay attention to whether there are plastic washers. All devices will need to be put in one place. It is important not to lose them, so that later you can easily return the lid to its place.

Instructions for removing the cover from the washing machine

Remove the top cover yourself It's not difficult, but you need to follow the instructions. In this case, you will be able to carry out the procedure without any problems.

Procedure:

It is necessary to remove all the fastening bolts first. Otherwise, it will not be possible to remove the cover.
You need to push the panel from the front away from you so that the fasteners come out of the grooves.
When the surface moves forward, you will need to carefully lift it and remove it.

Usually, you can quickly remove the top panel of a Whirlpool front-loading machine. However, there are sometimes exceptions. Some Whirlpool models are designed differently, which is important to consider. In this case, you will need to lift the panel, pulling it towards you. It is important to choose the right angle to remove the top part.

How to remove the cover of top-loading models

If a Whirlpool top-loading machine breaks down, you may also need to dismantle the cover. In this case, the procedure is slightly different. First, you need to disconnect the unit from the network, and then pull it out so that there is full access to the device. You should prepare the tools required for the procedure. We are talking about a screwdriver and a screwdriver.

Once the preparatory stage is complete, you need to proceed to dismantling the control panel. You should unscrew the screws. Usually there are no more than two. You need to disconnect the module, and then pull the wires out of the connectors.

After this, the cover will be removed, and you can proceed to further repairs. You will have to act carefully, identifying the breakdown. In addition, you need to know how to fix a specific malfunction. If you have no experience in this matter, you will need to contact a specialist. When the repair is complete, all that remains is to return the panel to its place. This can be done according to the same scheme, only in reverse order.

You will have to place the top cover so that the bolts fall into the grooves. Next, the screws need to be tightened tightly. You should make sure that all the elements are in place.After this, all that remains is to check the functionality of the lid. It shouldn't fly off. For top-loading machines, it is important that the top panel opens.

The process of removing the cover of the Whirlpool machine does not take much time. At the same time, it is important to do everything strictly according to the rules so as not to break the unit. If the cover cannot be removed, do not use force. In such a situation, there is a risk of breaking the panel. Taking into account all the recommendations, you will be able to complete the procedure quickly and competently. The main thing is to follow the instructions and be careful.