Owners washing machines They often complain that the device does not turn on. This situation is considered typical and has many different reasons. It's a completely different matter when the LG machine turns on itself. When the power cord is connected to the mains, the device emits a welcome melody from time to time and lights up the control panel. After this, you will notice that the equipment is in standby mode. Usually the device turns off, but then turns on again. We need to find out why the LG washing machine turns on by itself. There are different reasons and ways to solve the problem.
Do I need to reflash the device?
Some people believe that it is the “broken” firmware that causes the LG to malfunction. You may come across the opinion that reflashing the main module will help solve the problem. Of course, you cannot carry out the procedure yourself, as you can make many mistakes. This will cause even more problems with adaptation.
If the machine turns on in standby mode, then flashing the firmware will not help. All the masters who have dealt with this problem are sure of this. Even if the software is working properly, the device can activate itself. There were even tests carried out that confirmed this.
Experts say that only replacement of the main control unit. The problem is that a new part is expensive.Not all people are willing to spend money when the LG washing machine turns on by itself.
It’s worth figuring out what other causes of the malfunction could be. There may be other ways to deal with the problem. You need to consider all options before making a decision.
Problem with the button
The most common cause of malfunction of an LG washing machine is button. In some cases, the contacts that led to the on and off key did not work correctly. However, not in all cases it is this problem that provokes strange behavior of the device.
It is worth noting that spontaneous turning on of the LG can be caused by liquid getting on the button contacts. As a result, the wires cannot work fully. The wiring is highly sensitive to condensation. If it is not insulated well enough, a malfunction may occur over time.
Helped some people key replacement or treating it with alcohol. However, it cannot be unequivocally guaranteed that the problem will not return after a while. You will have to take care of waterproofing the connector and contacts, because this is the only way to prevent repeated failure.
Other reasons
It is worth considering other reasons why the machine turns on itself. The problem is not considered widespread, but still causes inconvenience.Sometimes even a master cannot accurately answer the question of what could cause this. In this case, people may decide to leave everything as is, because they do not experience any particular inconvenience.
Other reasons:
- You need to immediately check whether everything is in order with the outlet. The electrical socket may have broken, causing voltage surges. They, in turn, provoke the LG washing machine to turn on randomly. If possible, you should try connecting the unit to a different outlet. If the problem does not go away, then you will have to look for other reasons.
- There is also a situation when a malfunction occurs due to a broken plug. In this case, it is this element that supplies current incorrectly. It is better to contact a specialist, because as soon as he can definitely say whether the plug is really broken. It may become damaged over long service life or mechanical stress. In this case, the washing machine turns on by itself, which worries people.
Sometimes An error code appears on the washing machine screen. All that remains is to remember it and find out what exactly it means. Then you will be able to quickly understand the situation and understand how to fix the breakdown. If everything is done correctly, then the LG washing machine will no longer fail.
After connecting the grounding, the machine began to turn on on its own; before that, it worked without grounding for many years without glitches. I read on the forums that a possible reason is an energy leak through the ten, it has not yet been broken but the leak has already appeared, I turned off the ten (pulled the wires off it) and lo and behold, the machine stopped turning on spontaneously. Knowing the connection diagram for the ten, I put the wires back on the ten, and turned the plug 180° in the socket and all the problems disappeared. The fact is that from the power plug, one wire on the Ten is always schematically connected to the Ten, and the second is connected during heating by the electronics, if it turns out that exactly the wire to the Ten that is connected is constantly on the plug in the socket on the “phase” - counting leaks to grounding and this effect occurs, turning the plug into the socket the other way around, we connect the “ground” to the wire that is always connected, there is no leakage and the machine does not turn on itself.
I don’t really understand what phase, grounding and ten mean. BUT! This tip: turn the plug 180° and plug it into the outlet worked!!!! Thank you:)))