Why is the washing machine not spinning up?

alexander_pnz
CONTENT

AnswerUnfortunately, any, even the most reliable machine can stop working due to malfunctions.

A situation often arises when the washing machine does not pick up speed during the spin cycle. In this case, there is no need to panic. It is necessary to find out the cause of the malfunction and then eliminate it.

 

 

 

 

Problems that can be fixed without repair

 

The following washing machine malfunctions can be eliminated without repair:

  • Low voltage in the electrical network. When spinning clothes, the electric motor spends more energy than when washing. If the voltage in the electrical network is low, then the engine will not be able to operate at full power, and accordingly the washing machine will not gain speed during the spin cycle.

If everything is fine with the choice of program, and the weight and distribution of the laundry in the drum do not cause any complaints, then, alas, something is broken in the machine. The rotation speed of the drum depends on many components in the washing machine. Therefore, only a specialist can determine on their own what exactly is responsible for the fact that the machine does not want to gain the required speed.

  • The laundry may not even start spinning. In this case, you need to check the outlet using a voltmeter. If there is low voltage in the network, then you need to install a voltage stabilizer.
  • The washing program was set incorrectly. Today, almost all automatic washing machines contain programs that limit spin speed. Probably, the spin speed control located on the control panel of the machine was accidentally set to a low value. Or the spin may be turned off completely.
    Here you need to check that the washing parameters are correct.

Recent Entries

  • Many modern washing machines contain an unbalance sensor. He protects washing machine drumfrom serious malfunctions under excessive loads. The imbalance sensor also extends the service life of shock absorbers and bearings. The sensor works in such a way that when too much load occurs, the drum speed is reduced automatically. Then the laundry should be properly distributed in the drum at reduced speeds. If this does not happen, the laundry spinning is turned off altogether. If the washing machine has self-diagnostics, but a signal about the imbalance sensor being turned on appears on the display.

 

 

In any case, you need to open the hatch of the washing machine and manually distribute the laundry in the drum. Then you need to test the spinning operation.

 

Problems requiring repair All malfunctions related to engine speed and spinning will be considered in order of increasing complexity.

  • Washing machine repair will be required in the following cases:

Living outside the city: advantages and features of buying cottages in Kaliningrad

  •  The belt that connects the washing machine drum and the electric motor drive has stretched. The belt can simply slip, and in this case the washing machine will not pick up speed and perform the required spinning. It is necessary to dismantle the rear cover of the washing machine, and then check the belt tension and its condition.
  • The drum pulley mount has come loose . When this malfunction occurs, the connection between the pulley and the shaft may be lost. As a result, the pulley may spin. Here, it is enough to simply tighten the mounting bolt.
Selecting and installing inlet hoses: key points for long-term operation of the washing machine

The water level sensor is out of order

  • . If this part is faulty, the control unit will mistakenly believe that there is water left in the washing machine and will try to expel it. In this situation, the washing machine drum rotates at the lowest speed. The water level sensor is located under the top cover of the machine. Replacing it is quite simple. water level sensor from serious malfunctions under excessive loads. The imbalance sensor also extends the life of shock absorbers and bearings. The sensor works in such a way that if there is too much load, the drum speed is automatically reduced. Then the laundry should be correctly distributed throughout the drum at low speed. If this does not happen, the spinning of the laundry is completely turned off. If the washing machine has self-diagnosis, but a signal appears on the display that the imbalance sensor is turned on. In any case, you need to open the hatch of the washing machine and manually distribute the laundry in the drum. Then you need to test the spin operation.Problems requiring repair
How not to overpay: Secrets of choosing a budget but high-quality washing machine

All faults related to engine speed

  • and spin, will be considered in increasing complexity. Washing machine repair will be required in the following cases:
  • The belt that connects the washing machine drum and the electric motor drive has stretched. The belt may simply slip, and in this case the washing machine will not pick up speed and perform the required spin cycle. It is necessary to dismantle the rear roof of the washing machine, and then check the belt tension and its condition.
  • The drum pulley mount has come loose. When this malfunction occurs, communication between the pulley and the shaft may be lost. As a result, the pulley may spin. Here you just need to tighten the fastening bolt.

The water level sensor has failed
What is whiteness used for and can it wash floors?
How to add salt to a Bosch dishwasher: practical tips
home
Site Map
remove the electric motor.

We recommend reading Replacing brushes is not very difficult. Inverter washing machines do not have brushes, so this breakdown is not relevant for them.
The engine tachometer has failed

How to open a washing machine if it is locked . This sensor is located on the motor itself. It is necessary to control the rotation speed of the electric motor rotor. Therefore, it also controls the rotation of the machine drum according to the selected program. As a rule, a malfunction occurs due to the displacement of the tachometer coil. It is necessary to fix the coil in the place of the machine where it should be, and also check the wires. If the problem turns out to be serious, you will need to replace it.
. A problem such as interturn short circuit occurs quite often. If this breakdown occurs, the electric motor is able to rotate the machine drum only in washing mode. But it cannot gain the necessary speed for spinning. This is a fairly serious malfunction. The engine will need to be restored or replaced.

Unfortunately, any, even the most reliable machine can stop working due to malfunctions. A situation often arises when Damage to the control unit.
similar posts from this section

Why is the washing machine not spinning up? How to replace the drain hose in a washing machine with your own hands
Resetting error codes for the Brandt washing machine
  1. The washing machine does not rinse - reasons
    This is interesting

    Repair